Tulsa winch?

[brian s]

I have a Tulsa winch that I want to put on my m35a2 and was wondering if anyone knows anything about this winch as I have not yet seen one on a truck before.

 

[Jeepsinker]

You have a picture of the winch?

 

[brian s]

Yes but I'll have to wait until tomorrow morning as I can't upload from my phone for some reason. I got it from gm thay used it to pull 5th wheels off trucks for testing

 

[brian s]

Plus I need a front pto if anyone has a spare that they want to get rid of

 

[m16ty]

Tulsa made a bunch of winches. I've seen them everywhere from 6,000lb to 100,000lb. Without a pic or data plate info, it would be impossible to tell what you've got.

 

[rustystud]

"Tulsa" makes one of the best winches in todays market. They are extremely strong and have competitive pricing. I almost went with one for my deuce before I got this deal on the Warn 18000 .

 

[Jeepsinker]

I would definitely go with a Tulsa over the Garwood if it is properly sized, mounts easily, and doesn't look stupid on the front of the truck. We all know the Tulsa is a better winch.

 

[brian s]

ok this is what i have!!

 

[Jeepsinker]

Looks like a good strong winch. Only issue I could see is the worm gear housing may be a bit hard to fit in the space where it needs to go.

 

[brian s]

it's going to be nice this weekend so i'm going to be working on the truck and will check to see if it fits between the frame
i hope it will!!!

 

[cattlerepairman]

Pictures!!!!

 

[brian s]

post#8 has all the pic's of winch i have now going to dig it out this weekend and clean it up and see if i can get it to fit.

 

[brian s]

[h=4]Product Features[/h]

• Equiped with automatic drag brake that engages when clutch is released
• Sliding clutch with reverse draft
• Worm is forged, ground and hardened
• Deep groove, heavy duty radial ball bearings

[h=4]Product Benefits[/h]

• Prevents tangling of cable during free-spool operations
• Assures complete and even engagement under load
• Provides maximum service life and durability of product
• Bearings never require adjustment

 

[brian s]

this is what i just found on the winch.

 

[dmetalmiki]

You know, If you really want it to fit..It Will. Keep us informed with pictures, good fitting.

 

[Jeepsinker]

Never thought I'd see an 8274 on a deuce... That's a new one. I suppose it'll pull with enough snatch blocks.

 

[brian s]

Why do you say that?
It's rated at 20,000lbs

 

[Opie]

I think he's referring to the Warn on the decked-out firetruck.

 

[brian s]

Thanks I started to think that I'm not thinking about something.

 

[M37M35]

Tulsa Winch makes good units. I have one of those same winches I'm planning to mount to the rear of my deuce. Please keep us updated on the project.