i love my M1009 but living in Colorado presents some problems. At high altitude and pulling a trailer the HP goes way down and copious black smoke is produced. You would think the military has encountered this and dealt with it?? Is there a military turbo charger to solve this problem? I have checked Banks and they do not make or sell their aftermarket kit anymore. If anyone has pictures of a kit in place and helfpull information I would greatly appreciate it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Turbo charger questions
- Thread starter sdasdona
- Start date
You can buy Banks turbo kits for the 6.2L from a dealer on eBay. Cost is around $2800
Remember that these trucks ate 25+ years old. Companies are cutting back on making parts for them and working on newer vehicles. Even everyday parts the parts stores will have to get them from the warehouse. Not enough room on the shelfs.
There is no "military" turbo for the CUCV that I know of.
Remember that these trucks ate 25+ years old. Companies are cutting back on making parts for them and working on newer vehicles. Even everyday parts the parts stores will have to get them from the warehouse. Not enough room on the shelfs.
There is no "military" turbo for the CUCV that I know of.
Last edited:
AceHigh
Well-known member
- 2,176
- 31
- 48
- Location
- Lake City FL
The HMMWV engine is nearly identical and has the turbo. You have to move a few things around but lots of folks have done it.
GM did offer the Banks turbo as an dealer/factory installed option on the 6.2Ls before they came out with the 6.5L turbos.
www.coloradok5.com is a great source for additional K5 info. Along with dozens of other chevy diesel websites.
Two that I frequent are
www.thedieselpage.com
www.dieselplace.com
www.coloradok5.com is a great source for additional K5 info. Along with dozens of other chevy diesel websites.
Two that I frequent are
www.thedieselpage.com
www.dieselplace.com
Last edited:
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
Have you called banks direct? If I was to do it again I would look for a used 6.5 turbo. A hmmwv turbo is way to much work to get it to fit.
Blue2actual
Member
- 352
- 23
- 18
My 1028 has a 6.5 TD out of a HMMWV. Do a little minor cutting on the firewall to clear the rear/center mounted turbo and it fits fine.
Attachments
Last edited:
dstang97
Well-known member
- 1,859
- 31
- 48
- Location
- Clover, SC
I remember following a thread where somone did this and it seemed like they had to cut a lot. Got any pictures?