• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

unimog 404.1 leaking hub drive seal

aemarc

New member
1
0
0
Location
Airville Pa.
I Have a 1962 unimog 404.1 that leaks gear oil from the left front hub drive assembly. The seal in question is the one where the shaft goes into the hub drive. Does anybody know if you can change that seal without pulling the entire hub drive apart like it shows in the shop manual? Can it be pulled off as a complete assembly to change that seal? Also does anybody know the part number for the seal in question? Thanks!
 

NC_Pinz

New member
18
0
0
Location
North Carolina
I believe you'll have to pull the hub assembly. For parts and good info, I'd call Jim at Eurotech Services (google them). One of the best with Mog parts and overall knowledge. When I had my Mog, they were the only ones I'd get parts from.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks