• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Vacuum Regulator Valve Fitting?

The TH400 in my M1009 took a crap, I plan on putting a Nv4500 in its place but due to a lack of funds and me needing my truck I'm attempting to get it fixed. So far I’ve only replaced filter and fluid, vacuum tested the modulator valve and found this little rubber fitting on the vacuum regulator valve to be dry rotted to a point where wiggling it would cause me to loose vacuum psi quickly. what is this part called or a part number so i can replace it or do I really even need it? Can I just put the hoses on the valve and call it a day? Thanks.
VRV_01b.jpg
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
You must have the European version of the injector pump. Everything is on the wrong side. ;-)

Like cpf said the fitting is no longer available. Just hook the hoses directly to the valve. The top fitting is for the line going to the transmission. The bottom fitting goes to the vacuum pump.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks