Voltage switch/selector for MEP-16 3k gen.

[Gunzy]

I have what I believe to be a MEP-16. The data plate has been ground off but has a modification plate for conversion to the Yanmar diesel dated 2004. I am in need of the voltage selector that is on the far left of the control panel. I would post a pic but can't for some unknown reason. If anyone has one to sell please PM me. The knob on the one I bought has been broken of in a fall/drop. Thanks in advance for any help.

 

[Isaac-1]

You have either a MEP-016D (MEP-016C converted with a Yanmar L70) or MEP-016E (MEP-016B converted with a Yanmar L100) both have knobs on the left side, but overall share few components. Either way I think the knobs that JimC on here makes (3D prints) would work for you, check out his ad in the classifieds, or his signature on any post.


Ike

 

[Gunzy]

OK, I have a NSN for the switch if anyone can help me.
NSN 5390-00-259-4646 voltage selector switch
I need one with the knob and don't care if it is used as long as it works.

 

[Gunzy]

My units are MEP-16a's that have been converted to the Yanmar diesel. I need the voltage selector switch that is on the far left above the voltage rheostat. Any one have one or know where to get one?