VW Kurierwagen (VW 181)

[HUGO bOSS]

The suport for the interior lock of the engine lid and the suport for the arm... They will be welded in the new inside part...

 

[HUGO bOSS]

Need to make all this...





Still need to make the edge that holds the rubber that goes around the engine and welded in place with the another one...




And the outsider one already in place...





The inside panel with new metal on the edge:





All in the correct measure.

 

[HUGO bOSS]

Welding...





Welding...








Almost there...

 

[HUGO bOSS]

The rear is taking a shape again...

 

[HUGO bOSS]

Making the new part for the bumper suport...





With the bumper in place to have sure about the measures...





With the screws...

 

[HUGO bOSS]

On place...








More or less like factory...





The other side is rusty also...

 

[HUGO bOSS]

More griding to do...

 

[HUGO bOSS]

The missing corners...





Made by internet photos...





But the edge was rusty and with some missing metal...

 

[HUGO bOSS]

Only one thing to do:











With a template made by the other corner, that was ok...

 

[HUGO bOSS]

Almost there...





Still need to weld a smal edge...

 

[HUGO bOSS]

After in place should be aligned...

 

[HUGO bOSS]

The other corner...





Starting:

 

[HUGO bOSS]

The inside wasn't to bad...

 

[HUGO bOSS]

Allmost there...

 

[HUGO bOSS]

The interior reinforcment of the front right fender...

 

[HUGO bOSS]

With new metal...

 

[HUGO bOSS]

The interior waiting for the griding...

 

[HUGO bOSS]

A litle more work...





The right corner on the right place...


The rail for the engine rubber welded at his place...

 

[HUGO bOSS]

The lock piece with the rust removed and cleaned. Have also some weld spots...








Allmost there...

 

[HUGO bOSS]

The left new panel allmost in his place. The nuts are for the bumper suport...





The other one was allready welded at his place, inside.