Water/alcohol injection

[SrIrie]

Is any one running a water/alcohol setup on there MV? I no I read somewhere on here when I was reading all the old post’s that someone said that they were running water injection but not to use any alcohol (would like to know why no alcohol) I can’t seem to find that post again. I have put DIY water/alcohol injection on many cars and trucks, diesel and gas and have had really good results and as far as I know would work on an MV. All opinions, pic’s, how you did yours

 

[Angus1]

Get a hold of JWALER I think he has a water injection on one of his M35s.

 

[Capt.Marion]

Re: RE: Water/alcohol injection

Problem solved

 

[SrIrie]

Re: RE: Water/alcohol injection

Get a hold of JWALER I think he has a water injection on one of his M35s.

I used the search registered users for JWALER and it said no registered users matched your search. Is it spelled different maybe

 

[chevycrew]

RE: Re: RE: Water/alcohol injection

JWALLER

 

[SrIrie]

Re: RE: Re: RE: Water/alcohol injection

JWALLER

Thanks

 

[jwaller]

RE: Re: RE: Re: RE: Water/alcohol injection

yes I do have it and no it's not a cummins in the deuce. I have the std multifuel in the deuce. I surmise that with the extra fuel, boost, and water inj I have added about 150hp to my truck and lowered the egt that it ran when stock.

 

[illtemper]

jwaller...where can I find details of your mods? I have an m52a2 I'd like to do this to. does it affect the durability of the engine ? thanks

 

[SrIrie]

Are you still running the stock turbo and witch one? What are your boost levels also have you had any head gasket issues? And does anyone know how much boost a stocker can handle if you can keep the EGTs down. All the water injection I have done I have used just jets to atomize the water with no variable flow just on or off with a set boost level it has always worked quite well but I always up for new ideas. Is the map sensor setup you run come in a water injection kit or did you build the system?
Any info would be helpful, things you have found do’s and don’ts

 

[jwaller]

jwaller...where can I find details of your mods? I have an m52a2 I'd like to do this to. does it affect the durability of the engine ? thanks

yes it affects the durability. it makes it last longer if you ask me. you are running lower egt's.

 

[jwaller]

Are you still running the stock turbo and witch one? What are your boost levels also have you had any head gasket issues? And does anyone know how much boost a stocker can handle if you can keep the EGTs down. All the water injection I have done I have used just jets to atomize the water with no variable flow just on or off with a set boost level it has always worked quite well but I always up for new ideas. Is the map sensor setup you run come in a water injection kit or did you build the system?
Any info would be helpful, things you have found do’s and don’ts

I have a "D" turbo running about 20psi. it has whatever head gasket it came with. I assume it's got to be the good one as I havent had a problem yet.

The kits I sell come with map sensors. it's the only way to go. "progressive" is the way to do it right.

Don't use meth or anything flammable. I stick with water bc I had an awful experience with meth and alky.

if oyu search my name you will find a lot of info I've written on this subject. if there is anything you dont find please ask.