Wile E. Coyote
Active member
- 394
- 78
- 28
- Location
- Lynden WA
Anyone know what the weight of a Huey tailboom by itself is?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Weight of UH-1D/H Tailboom?
- Thread starter Wile E. Coyote
- Start date
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
I would not think more than a couple hundred pounds.
- 18,541
- 5,848
- 113
"By itself" could have many definitions and specifications.
Are we talking Structure and Skin ONLY;
Structure, Skin, Tail Rotor Drive Components;
Structure, Skin, Aft Wire Harness and Electrical Components (Light, etc.);
or other combinations and mutations.
I'm reminded of the movie PHENOMENON....
https://www.youtube.com/watch?v=qHDSNs9wBpU
Oh, I almost forgot the Access Covers and Panels and their attaching hardware - Installed or Removed, Bob?
Are we talking Structure and Skin ONLY;
Structure, Skin, Tail Rotor Drive Components;
Structure, Skin, Aft Wire Harness and Electrical Components (Light, etc.);
or other combinations and mutations.
I'm reminded of the movie PHENOMENON....
https://www.youtube.com/watch?v=qHDSNs9wBpU
Oh, I almost forgot the Access Covers and Panels and their attaching hardware - Installed or Removed, Bob?
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
I did upload the -10 Tm here a while ago if that could be useful?
https://www.steelsoldiers.com/showthread.php?165349-Tm-55-1520-247-10
https://www.steelsoldiers.com/showthread.php?165349-Tm-55-1520-247-10
Last edited:
Jericho
Well-known member
- 1,180
- 69
- 48
- Location
- Landaff NH
enough to use a ten k forklift and the lifting jig or 6 big Army dudes. It’s awkward
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Like mentioned, what do you mean “by itself”?
Vertical Fin and Horizontal stabilizers?
Gearboxes?
T/R Driveshaft?
Control tubes?
Wiring?
Etc........
Look in the -10
It should be in there.
Might not break it down as far as you need it, but will give you a starting point.
I haven’t hardly looked at the UH-1H -10 since flight school.
Vertical Fin and Horizontal stabilizers?
Gearboxes?
T/R Driveshaft?
Control tubes?
Wiring?
Etc........
Look in the -10
It should be in there.
Might not break it down as far as you need it, but will give you a starting point.
I haven’t hardly looked at the UH-1H -10 since flight school.
foxtrk2
Member
- 153
- 4
- 18
- Location
- foxboro ma
for what its worth , I was a huey mech. in nam and we carried them around by hand. took two guys but wasn't bad. that usually didn't include the tailrotor gearbox assembly
- 18,541
- 5,848
- 113
Just curious... Is that a USGI Standard "Two Guys" or South Vietnamese Standard ... They are like comparing apples to apricots.
Just saying... The typical American GI draftee in VN was a 19 year old, 120-pound kid with minimal body fat and typically pretty durable.
But the TWO GUY standard really doesn't define the tail boom weight (whose actual description is still pretty blurry).