TLangM998
New member
- 21
- 0
- 1
- Location
- Buford, GA
I get confused on which tech manual is which. What are the differences in them? Thanks!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What are the descriptions for the various tech manuals?
- Thread starter TLangM998
- Start date
- 9,604
- 1,493
- 113
- Location
- mid- michigan
How to use/read Technical Manuals
-10 operators manual
-20 depot level
-34 major overhaul this could also be the -24
ending -p is parts manual
-10 operators manual
-20 depot level
-34 major overhaul this could also be the -24
ending -p is parts manual
Last edited:
snowtrac nome
Well-known member
- 1,674
- 139
- 63
- Location
- western alaska
1 is operators level 2 is unit level support 3 is general support and 4 is depo level. you take a manual that says xxxx-xxx-24 that book will cover every thing from unit level maintenance to depo level a standard xxxx-xxx- 20 is only unit level support. A lot of generators and small equipment have 14 series manual that cover every thing from operators to depo.
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
In the TM9 series manuals the -10 manual contains information an operator would need to have. operation instructions, road speeds, capacities, weights
The -20 series manuals are generally for troubleshooting. Flow charts, special tools, diagnosing starting, cooling, electrical or shifting problems
The -24P manuals are the parts manuals
The -34 manuals are repair manuals for specific assemblies like alternators, how to replace a head assembly or a wiper motor, etc They also include more specific troubleshooting information
The TB9 series manuals all end in -35-x and are specific installation manuals. How to install a specific piece of equiment like a radio or GPS into a particular model HMMWV
MWOs are Maintenance Work Orders that have detailed information for vehicle modifications or retrofits like installing seatbelts or airlift bumpers or dual pull brakes.
Major components like engine and transmission have seperate dedicated manuals of their own.
The -20 series manuals are generally for troubleshooting. Flow charts, special tools, diagnosing starting, cooling, electrical or shifting problems
The -24P manuals are the parts manuals
The -34 manuals are repair manuals for specific assemblies like alternators, how to replace a head assembly or a wiper motor, etc They also include more specific troubleshooting information
The TB9 series manuals all end in -35-x and are specific installation manuals. How to install a specific piece of equiment like a radio or GPS into a particular model HMMWV
MWOs are Maintenance Work Orders that have detailed information for vehicle modifications or retrofits like installing seatbelts or airlift bumpers or dual pull brakes.
Major components like engine and transmission have seperate dedicated manuals of their own.
TLangM998
New member
- 21
- 0
- 1
- Location
- Buford, GA
Thanks porky, snowtrac, and papa! What exactly is depot level? Obviously a greenhorn here!
Last edited:
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
The -40 depot level manuals are the hardest to find and go into detailed repair and overhauls. For instance, they will tell you how to replace the diodes in the alternators where the -30 manual will just tell you to replace the rectifier plate. A lot of their diagnostics and troubleshooting assumes you have very specialized test equipment that most of us will never see so they are marginally useful to us in the field.