• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What Are They?

Third From Texas

Well-known member
2,777
6,527
113
Location
Corpus Christi Texas
They look pretty solid, and it Looks like they would be just below the tailgate when it is opened... Maybe a bracket to attach a loading ramp for the dune buggy/heavily armed UTV?
They are one all the '09 airdrops (even the 'lil guys).

As I said, I wonder if it's an airdrop thing or just the very final A1R's. I haven't looked at the P variants yet.


39ab2497-8d36-4b52-92f6-fa1ad1a9c1e0.jpg
 

Third From Texas

Well-known member
2,777
6,527
113
Location
Corpus Christi Texas
The M1082 safety chains won't reach if the hitch is extended.

The result is a sort of chain-jackknife long before full turn radius is achieved.

I'm sort of glad that I noticed it as I realized how dangerously short the safety chains are on the M1082. In rough terrain that "chain-jackknife" restriction can occur a lot sooner at steeper angles.
 

chucky

Well-known member
Steel Soldiers Supporter
6,640
19,014
113
Location
TN .
The M1082 safety chains won't reach if the hitch is extended.

The result is a sort of chain-jackknife long before full turn radius is achieved.

I'm sort of glad that I noticed it as I realized how dangerously short the safety chains are on the M1082. In rough terrain that "chain-jackknife" restriction can occur a lot sooner at steeper angles.
If i can buy build scrounge one of those tubes and the frame mount it slides in i think i would put the weld on loops to hang the safety hooks on the end of the tube on both sides of the pintle
 

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,317
3,208
113
Location
Fort Worth, Texas
It's part of the airdrop design on later A1 trucks. My 2009 BAE M1093A1 has it but my 2008 S&S M1078A1R doesn't and both have the upgraded alternator, coil over relief springs, etc. So far all late LVAD and LAPES/AD trucks I've seen have it (M1081A1 and M1093A1) but I've yet to see a M1094A1 with it though time will tell. If you scope out the pics below they elevate the truck off the pad to stuff equipment under it. It's possibly used as another weight bearing point and tie down point.
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks