- 125
- 214
- 43
- Location
- Florida
I picked up a second Deuce, a 1971 Kaiser M35A2 WO/W from a member on this site a few months ago and have been slowly making my way through it.
So far I have:
Replaced the air governor
Replaced almost all injection pump fuel lines (1 more to go)
Greased all points in the LO (with the exception of the trunnion which I will be doing this upcoming week)
Repaired drivers side mirror that was damaged during transport
Replaced the breather gasket
Replaced the oil pressure regulator and gasket
Replaced the radiator cap and topped off coolant
Replaced air filter
Replaced rubber connectors and clamps on u-pipe from air cleaner to turbo
Changed oil with Rotella 15w40 and OptiLube ZDDP
Changed primary fuel filter (secondaries will be replaced this upcoming week)
Added OptiLube XPD to fuel tank
Replaced gear oil in all 3 axles, transmission and transfer case
Replaced gear oil in steering gear box (this will get rebuilt in the future to eliminate the leak)
Replaced brake pedal return spring, clutch return spring and throttle spring
Adjusted throttle cable
Replaced Engine Stop cable
Replaced non-functioning in-tank fuel pump and replaced with a good take out
Removed batteries, charged and conditioned before re-installing
Replaced front shocks
Next Tasks:
Grease trunnion
Replace secondary fuel filters
Service front end - new boots/clamps, axle seals, brake cylinders, soft brake lines
Service 2nd and 3rd axle bearings, seals, soft brake lines and asses brake cylinders and rebuild if needed
Bleed brake system
So far I have:
Replaced the air governor
Replaced almost all injection pump fuel lines (1 more to go)
Greased all points in the LO (with the exception of the trunnion which I will be doing this upcoming week)
Repaired drivers side mirror that was damaged during transport
Replaced the breather gasket
Replaced the oil pressure regulator and gasket
Replaced the radiator cap and topped off coolant
Replaced air filter
Replaced rubber connectors and clamps on u-pipe from air cleaner to turbo
Changed oil with Rotella 15w40 and OptiLube ZDDP
Changed primary fuel filter (secondaries will be replaced this upcoming week)
Added OptiLube XPD to fuel tank
Replaced gear oil in all 3 axles, transmission and transfer case
Replaced gear oil in steering gear box (this will get rebuilt in the future to eliminate the leak)
Replaced brake pedal return spring, clutch return spring and throttle spring
Adjusted throttle cable
Replaced Engine Stop cable
Replaced non-functioning in-tank fuel pump and replaced with a good take out
Removed batteries, charged and conditioned before re-installing
Replaced front shocks
Next Tasks:
Grease trunnion
Replace secondary fuel filters
Service front end - new boots/clamps, axle seals, brake cylinders, soft brake lines
Service 2nd and 3rd axle bearings, seals, soft brake lines and asses brake cylinders and rebuild if needed
Bleed brake system
Attachments
-
219.9 KB Views: 28
-
147.8 KB Views: 29
-
124.7 KB Views: 28