-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What did you do to your deuce this week?
- Thread starter Seth_O
- Start date
joshs1ofakindxj
Active member
- 738
- 120
- 43
- Location
- SW PA
Front driver side hub boot was leaking (old zipper boot leaking at the zipper) so I've been working on that all weekend. I'm replacing all seals and packing bearings. The seals and the bearings looks great so I'm going to hold off on doing the other side until it needs it.
Next is install the A3 electric wipers and bolt on all the new NDTs I have, then paint 3 color camo with wally world spray paint. We'll see how far I get today...
Next is install the A3 electric wipers and bolt on all the new NDTs I have, then paint 3 color camo with wally world spray paint. We'll see how far I get today...
zombiekiller
New member
- 10
- 0
- 1
- Location
- TN
I was planning to take the Deuce on a nice Saturday drive but the hissing behind the dash had other ideas. So went to Napa and had them make me some replacement hoses for the air shift switch and the air gauge. While I was dirty and all the tools were out I went ahead and repaired my blower motor that burned out on the first day I bought it.
Attachments
- 2,308
- 893
- 113
- Location
- Fargo ND
I took the cargo cover off and all the bows then took the spare out of the bed and the carpet (in for parade duty) then I lifted my brand newly repainted S-280 como shelter and installed it into the bed of the Deuce, now the camper conversion will continue and all parade duty now falls to the 925!
KK
KK
Rodger
New member
- 129
- 0
- 0
- Location
- Placitas, New Mexico, USA
Mine is an M109, so of course, I am making a camper. On Saturday I greased the Zerks.
On Sunday, I worked on and tested the dog ramp. Actually the dogs tested the dog ramp.
They approved it, with some hesitation. After the dog test, I replaced the anti skid surface with scate board grip tape. It feels like 100 grit sandpaper. Now the dogs can file thier nails when they run inot ond out of the camper.
Rodger
On Sunday, I worked on and tested the dog ramp. Actually the dogs tested the dog ramp.
They approved it, with some hesitation. After the dog test, I replaced the anti skid surface with scate board grip tape. It feels like 100 grit sandpaper. Now the dogs can file thier nails when they run inot ond out of the camper.
Rodger
caliber1
New member
- 995
- 8
- 0
- Location
- Elcho, Wisconsin
Installed new Dynomax muffler and am currently working on front brake cylinders and rubber lines.
- 3,256
- 3,354
- 113
- Location
- NORTH (Canada)
Bypassed the FDC, plugged the manifold heater fuel line at the pump and did an oil change!
SMOKEWAGON66
New member
- 1,144
- 21
- 0
- Location
- California
This...and this.
Attachments
Last edited:
- 1,425
- 37
- 48
- Location
- Winter Haven, florida
Getting ready to bobb the 2 1/2 ton.
Attachments
SteveKuhn
New member
- 1,227
- 4
- 0
- Location
- Hasbrouck Heights NJ
I drove it about 11 out of 14.5 hrs to, from and at the MTA show on Sunday. Oh - and bought it a bunch of spare parts over the 4 days.
Steve
Steve
Attachments
Last edited:
islandguydon
Well-known member
- 3,724
- 783
- 113
- Location
- Michigan
Did you get the dome light from the classifieds here on SS..?
I went to get one and he was sold out. Your a lucky guy...!
joshs1ofakindxj
Active member
- 738
- 120
- 43
- Location
- SW PA
Yesterday the girlfriend helped me wash the truck. We went and ate northern Chinese health food at a local restaurant while it dried it in the sun. Then when we got back we attacked it with $0.99 cans of flat black spray paint from Walmart and Rustoleum flat brown spray paint. 15 or so cans later it looks pretty good, and now I know the girlfriend can spray paint.
I used BBQ grill black high temp spray paint on the stack.
And yes, that is an octagon barn in the background.
I used BBQ grill black high temp spray paint on the stack.
And yes, that is an octagon barn in the background.
Attachments
SMOKEWAGON66
New member
- 1,144
- 21
- 0
- Location
- California
No, Im not really sure where I got the dome light. I bought it shortly after I got the truck in '10. I think I got it from Eastern surplus.
VP17IFT
New member
- 76
- 2
- 0
- Location
- Chancellor/AL
I made a scrap run from work starting in the high bay in front of a UH60A/L sim.
Attachments
crazywelder72
New member
- 701
- 2
- 0
- Location
- Winchester Ma
I removed the 53's of axle 2 and 3 so i could swap out my wheel cylinders. However it was not the problem. New axle seals were needed and the brake drums needed a good cleaning (they were covered in clay). Axle 3 had to stay apart as i had to wait for a wheel stud via mail. continued to pressure wash the inside of the rims that were off the truck.
Attachments
Deucenut
Member
- 64
- 0
- 6
- Location
- Provo, Utah
Brought it home from Iowa . I'm glad it is at its new home.
. I'm glad it is at its new home.
Jesse6325
New member
- 181
- 1
- 0
- Location
- Orange Grove, TX
Tried adjusting the drivers side rear axle bearings to get them to run cooler.
Filled her up with pump diesel (OUCH!)
Hauled off one load of stuff to be recyled and a load of trash, Really gotta love alll that room in the bed!
Oh, And finally replaced the parking brake cable and moushache spring yesterday after work.
Filled her up with pump diesel (OUCH!)
Hauled off one load of stuff to be recyled and a load of trash, Really gotta love alll that room in the bed!
Oh, And finally replaced the parking brake cable and moushache spring yesterday after work.
machinist75
Member
- 777
- 7
- 18
- Location
- Murphy, TEXAS
Installed convoy lights, cb radio, and two 24 volt dash fans.