Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
I've got an electric hoist rated for 500 pounds. It lifts the cab just fine, but I suspect the cab weighs less than the bed. Does anyone know what the M37 bed weighs?
Thanks...
Thanks...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What does the M37 bed weigh?
- Thread starter Travlr
- Start date
- 107
- 218
- 43
- Location
- Charlottesville, VA
I've pulled mine for repair. At the shop two of us were able to maneuver (not lift) it by hand. If it were mine, I'd give the 500 lb hoist a try. It'll either lift it or not...
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
While I appreciate the thought, I'd rather know what it weighs. I'm not inclined to break a $1000 hoist or break a cable so it falls on me just to give it a try.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
I was able to lift mine off with 4 people. My girlfriend, her 15 year old son, my 10 year old son and myself, so your hoist should do fine.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
You can also "test lift" it before committing to the lift. Rig it up, pick it up a couple inches and let it hang for a few minutes.
That way, if something DOES fail, it isn't catastrophic.
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
Appreciate the ideas and if all else fails that's probably what will happen, but I'm still looking for a number. Surely someone knows with all the guys here that know every piece of trivia possible about their vehicles.
I used to do 400 pound reps with my legs, but I'm a lot older now. I tried lifting one side today and couldn't budge it. Your ten year old must be a beast.
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
You can always add a snatch block or two if you have them. An ATV one would work depending on the size of the cable. Less stress on everything except the beam carrying the load.
Old age has reduced my lifting capacity as well. Crap.
Old age has reduced my lifting capacity as well. Crap.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
Just enthusiastic...
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
It weighs 4 guys. Just that.
Not even 500 lbs., if you're talking a bare bed: no tailgate or side racks.
Not even 500 lbs., if you're talking a bare bed: no tailgate or side racks.
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
Well it looks like I'll have to lever it onto the trailer and take it down to the local scales to see what it weighs. After all the answers it's just made me more curious.
- 191
- 58
- 28
- Location
- North Lake, WI
My guess is 400 pounds.
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
Still looking for a real number...
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
Life is pretty short, ya know...
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
Yup... Too short.
Don't really want to make it shorter by doing something dangerous. A good answer from someone that knows would make it easy.
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
More like too short for OCD...
Travlr
Member
- 56
- 59
- 18
- Location
- Middle a Utah
LOL... That's funny. I just accused a guy of that on another forum because he insists he needs really high quality, matching paint... to touch up holes he's going to drill in his engine compartment to mount some struts to lift the hood... and the holes are UNDERNEATH the brackets that will hold the struts. I call that OCD.
Is it unreasonable to ask a forum full of supposedly knowledgeable people for a weight before doing something potentially dangerous?
I had another guy tell me he was underneath his '69 442 which was up on jack stands... when an earthquake shook the car and it rocked hard but stayed on the jack stands. Now he doesn't go underneath the car without a block of wood that is thicker than he is. So OCD?
I knew a guy that was loading a full Coke machine using one of those tailgate hoists and the machine fell off and landed across his body, vertically. Crushed his right side, foot, leg, hip, ribs, shoulder. Not pretty. The guy said he should have been more careful. I think he wishes he'd been a little more OCD.
And I'm still wondering where all the experts are. We all have a lot of fun with these machines but I need some information before I do something stupid...
If you guys that like to guess or just test your luck want to do it differently, fine. I'll be the guy hoping for the best.
- 2,661
- 2,194
- 113
- Location
- Sunman Indiana
Plenty of cheap hanging scales on Amazon or elsewhere that will get you close enough, test with a known weight, then start picking your bed and stop if the scale hits 495lb.
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
I've been rebuilding & driving M37's longer than most of the guys on the forum.
The bed is the least lethal thing om the truck. Well, maybe more than the seat covers...
Anyways, please don't confuse OCD with stupid. Knowingly setting up something that will hurt you is the latter.
The bed is the least lethal thing om the truck. Well, maybe more than the seat covers...
Anyways, please don't confuse OCD with stupid. Knowingly setting up something that will hurt you is the latter.
- 2,677
- 8,648
- 113
- Location
- Alexandria, La
D-
Several knowledgeable people who have moved these, worked with these and know these (and I consider your knowledge the gold standard) have explained to him how to safely move the bed, test his hoist etc without danger to himself or the bed.
He has decided he will not move it without a number, and in doing so has become very patronizing.....
At this point, I say let the thing sit there. We aren't going to convince him otherwise until he gets a number.
Most everyone on the forum knows how much I hate this, but let me ask @Travlr
"Have you read the TMs?"
- 1,715
- 3,845
- 113
- Location
- Hidden Valley, Az
Ha!