CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
For a trailer Jack I go to TSC (tractor supply). Just get a heavy duty one and weld your own bracket up if you have to. You can weld right?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your CUCV today/lately - Part 2
- Thread starter Warthog
- Start date
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
I do have a welder, and can adhere metal together, but refuse to call myself a "welder". The gifts of age aren't always what we want to unwrap! However, these trailers already have a mounting point that is common to civy tongue jacks.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Ok.
I have been welding since I could wear the hood and hold the stinger so I sort of forget not everyone can weld in their sleep. Lol
Bullydog uses those mounts for most of their jacks I'm 99% sure.
rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
Drove the 86 1009 to work this morning, 10 inches of snow, never put it in 4 wd. Was a little tricky driving a short wheel based 1009 with a locker and 4.56 gears.Had to be very careful with the fuel pedal or I was sideways.
Last edited:
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's a LOT of snow for April. Is more coming?
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
I'll just leave this here and let you guys wonder what I did with my CUCV today....
Attachments
True Knight
Active member
- 673
- 179
- 43
- Location
- San Pedro, CA
Ignition switch repair?I'll just leave this here and let you guys wonder what I did with my CUCV today....
NovacaineFix
Member
- 662
- 1
- 18
- Location
- San Diego, California
That looks like a lot of spilled coffee, lol
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
Removal, but I'll give you a cookie anyway..
Cylinder siezed..popped out steering wheel lock pawl.. removed ignition bar....
Dropped the steering column..removes ignition switch...
Will be rewiring with a racecar style switch and pushbutton start.....i think..lol
Its running now..using the key..manually actuating the ignition switch (not cylinder) hahahah
GunnyM1009
Well-known member
- 354
- 530
- 93
- Location
- Roanoke/Alabama
Why did you switch to 4.56 gears? Or did you put on a 14bolt
- 867
- 647
- 93
- Location
- Cooperstown NY
I love riddles.I'll just leave this here and let you guys wonder what I did with my CUCV today....
Last edited:
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I am pulling out a 700R for a customer that wants one in his M1009. I don't know why I don't ask questions. Show me the money. Done.
He is givig me his 400 TH and 208. ??? Back in the mid 90's I had guys waiting for 400 TH from the CUCV's I was parting out. I always sold them the transmission and transfer case for $550. exchange. I put the 700R transmissions on the scrap pile and sold them as cores to re-builders. Now everyone wants 700 R transmissions. I still like the 400 TH as tough a transmission that you can get and a 50 year old proven design. I never all out killed one under normal use. I split a few cases plowing snow but have learned the early warning signs of that onslaught of transmission cases. That hesitation between drive to reverse can be disastrous if you accelerate during the hesitation period.
He is givig me his 400 TH and 208. ??? Back in the mid 90's I had guys waiting for 400 TH from the CUCV's I was parting out. I always sold them the transmission and transfer case for $550. exchange. I put the 700R transmissions on the scrap pile and sold them as cores to re-builders. Now everyone wants 700 R transmissions. I still like the 400 TH as tough a transmission that you can get and a 50 year old proven design. I never all out killed one under normal use. I split a few cases plowing snow but have learned the early warning signs of that onslaught of transmission cases. That hesitation between drive to reverse can be disastrous if you accelerate during the hesitation period.rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
Actually it was 12 inches of snow. And I hope winter is over.
rsh4364
Active member
- 1,372
- 15
- 38
- Location
- greensprings ,ohio
The fire department that owned it before me regeared the 10 bolt differentials and put a posi in front axle.
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
I surgically pulled the 700R transmission for the customer. Is the 700R and the 400TH transfer case the same? They appear to be the same. I thought they were but this guy says NO. I said they are both NP208 C transfer cases. He thinks it has a NP241. The tag is missing. He does not want the transfer case because he said it is different. I don't think so. But the transmission is gone he wanted that. Also the spacer from the TH400 will fit the 700R am I correct? That is why I never change anything. It is a challenge just getting a straight answer. And everyone seems to have a different opinion as to what is good and what is bad and this don't fit that. ETC ETC ETC. Not a nice day to work in the dirt but beats being under the dirt. Have a great day. I sold this truck 2 times and they never came back for it.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Meaning it was paid for, but never picked up?
Kaiser67M715
Member
- 699
- 26
- 18
- Location
- NH
700r4 has 27 spline output shaft, TH400 has 32 spline output, so transfer cases are not swappable, also 700r4 is about 1 inch shorter then TH400
I am unaware of any differences in the spacer/adapter
Sent from my iPhone using Tapatalk
I am unaware of any differences in the spacer/adapter
Sent from my iPhone using Tapatalk
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
The spacer adapter is not the same for a CUCV. I can see that. I was surprised that this 1/2ton truck had the heavy rods bolted to the side of the transfer case and running to the back of the engine. I will put them on Terminus M1009 just for good measure.
GunnyM1009
Well-known member
- 354
- 530
- 93
- Location
- Roanoke/Alabama
Gotcha I love the 3.08 gears I really dont do any heavy work with Gunny though so they are fine for me. If I had 4.56 I think I would have to do the 700r swap so I could keep my highway speed at lower rpm's.
PeeWeeQ
Member
- 161
- 4
- 18
- Location
- Altoona, WI