It appears to be a HF HM with an electric winch on it…
Attachments
Last edited:
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done WITH your FMTV ( trips, Rescues etc) NOT: fixes, updates etc
- Thread starter coachgeo
- Start date
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
Yep. I had on on my M1078 and I have one in my M1082 trailer.
Some rattle can camo and it's ready for an NSN....
For the truck I made a 4"x4" drop-in so it could be moved to any one of the four corner posts (that's what they are for).
Total cost is about $250 after paint.
Or you can get the real one for the LMTV if you want to piss away about $5000.
Both work equally well.
1/2 Ton Capacity Pickup Truck Bed Crane with Hand Winch
Amazing deals on this 1/2Ton Capacity Pickup Truck Crane at Harbor Freight. Quality tools & low prices.
www.harborfreight.com
2000 lb. Utility Trailer Winch with Steel Rope
Amazing deals on this 2000Lb 12V Utility Trailer Winch at Harbor Freight. Quality tools & low prices.
www.harborfreight.com
Last edited:
I bet this thing really comes in handy for you to relocate the XXXL ones.Yep. I had on on my M1078 and I have one in my M1082 trailer.
View attachment 867859
View attachment 867860
Some rattle can camo and it's ready for an NSN....
View attachment 867858
For the truck I made a 4"x4" drop-in so it could be moved to any one of the four corner posts (that's what they are for).
View attachment 867861
Total cost is about $250 after paint.
Or you can get the real one for the LMTV if you want to piss away about $5000.
Both work equally well.
1/2 Ton Capacity Pickup Truck Bed Crane with Hand Winch
Amazing deals on this 1/2Ton Capacity Pickup Truck Crane at Harbor Freight. Quality tools & low prices.
2000 lb. Utility Trailer Winch with Steel Rope
Amazing deals on this 2000Lb 12V Utility Trailer Winch at Harbor Freight. Quality tools & low prices.
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
Last edited:
Now thats just wrong on so many different levels ! What the fattest girl you ever jigged up in that thing ? Does the truck lean over much ? I assume you have to keep the boom slid all the way in on the big lifts .
- 284
- 586
- 93
- Location
- Portland, OR
Cruised to the coast to test CTIS sand mode.
- 7,711
- 19,750
- 113
- Location
- Charlotte NC
.
Nice pix!
Seems that you have a nice looking patch of water and sand to go play in.
- 1,813
- 1,518
- 113
- Location
- Orlando, FL
Did it work? Your tires look fully inflated.
- 284
- 586
- 93
- Location
- Portland, OR
Actually it worked amazing! Yeah its hard to tell in the sand but those were down at 20psi. Its really noticeable the squish on pavement, but not so much in the sand. The CTIS complains if you go over like 12 miles an hour in the sand mode, so I tried cross country which is 35 psi I believe and it was markedly bumpier, so went back to sand and did the slow cruise.. I didn't want to get buck wild on my first trip to the dunes so I took it slow. You definitely need some momentum to climb steep dunes. I tried to slowly torque up one as a test and it dug in. All in all I was super impressed with the sand ability of this truck.
- 284
- 586
- 93
- Location
- Portland, OR
Actually, I zoomed in and you can kinda see it here.
pretty good contact patch.
pretty good contact patch.
- 467
- 1,109
- 93
- Location
- Wapakoneta, Ohio
I drove my 1078 to Work Friday, picked up mk28 basic issue package crane and an MEP 802a i had shipped there. Normally only a 12 minute drive to work maybe 15 in the truck but it was a fun test. Only second trip in the Truck
- 494
- 1,073
- 93
I put together a cheap HF crane, replaced the hand crank with an electric winch, and replaced the steel cable with synthetic line and mounted it into the parachute pocket using a hitch extender.
Then I moved my winch parts out of the bed, and went and fetched a 460 pound anvil. The mounting system needs a little work. Since everything is "at rest" when I pin the hitch extender into the pocket, and then the crane to the extender, when it gets a bit of load it pulls the slack out of the connections and causes it to tip a bit. Not sure yet how I'll handle that, but for now it got the job done. Darn handy thing.
Then I moved my winch parts out of the bed, and went and fetched a 460 pound anvil. The mounting system needs a little work. Since everything is "at rest" when I pin the hitch extender into the pocket, and then the crane to the extender, when it gets a bit of load it pulls the slack out of the connections and causes it to tip a bit. Not sure yet how I'll handle that, but for now it got the job done. Darn handy thing.
Took a short cruise for an ice cream cone. Got lots of quizzical looks and many more thumbs up. Might need to think about installing a low-keyed but funny auxiliary horn. Took the long way home checking out the scenery.
My window crank stopped moving the glass up & down so I dug in to that. Found that the glass simply came out of the anchor bracket. Removed the deteriorated rubber gaskets & used pieces of an inner tube and adhesive to make new gasket / cushions.
While the door panel was off I thought I would reconnect the interior door lock. Decided to leave it disconnected since the key lock has no key & I would hate to have that door inadvertently lock and not have a key.
My window crank stopped moving the glass up & down so I dug in to that. Found that the glass simply came out of the anchor bracket. Removed the deteriorated rubber gaskets & used pieces of an inner tube and adhesive to make new gasket / cushions.
While the door panel was off I thought I would reconnect the interior door lock. Decided to leave it disconnected since the key lock has no key & I would hate to have that door inadvertently lock and not have a key.
Last edited:
- 284
- 586
- 93
- Location
- Portland, OR
Flying the colors for Memorial Day weekend.
- 467
- 1,109
- 93
- Location
- Wapakoneta, Ohio
I also took a trip DQ for ice cream and to Oreilly auto parts. lots of looks as i backed that giant into a spot and went inside for my tasty treat. Guy at auto parts store asked if i could bring my big truck next time.
Did about 60 miles to try and keep blowing the cobwebs out. Sometimes the ABS light comes on after start up and stays on for a while before going out. As we’re cruising the back roads I thought to myself “these canvas covered seats are more comfortable than I remember in the HMMWV’s”. After a while my butt told me otherwise. I might have to breakdown and find a more comfortable seat bottom without disturbing the “OEM” look.
- 279
- 933
- 93
- Location
- Knoxville, TN
The 1084 got used this past weekend to set some retaining block at the parents house on the farm. Happenstance I was focused on what I was doin and didn’t get a picture of setting the block with the crane but here’s a roughly before and after pic
Attachments
- 1,813
- 1,518
- 113
- Location
- Orlando, FL
How much do those blocks weigh each?
- 3,748
- 1,519
- 113
- Location
- North Carolina - FINALLY !
I did a bunch of 2x4x2 at about 2400 lbs each.
I wish I could get those fancy ones