• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

what is this? tracked vehicle with pallet loading system

C

CBR Metalworks

Banned
526
6
0
Location
Winston-Salem, NC
Thanks, I didn't know that. Do you know for sure this transmission is the same as what was in the other models? It is a 6-speed automatic, and bolts in line with the engine (not beside, as I understand is how the M113 is)
 
NDT

NDT

Well-known member
Steel Soldiers Supporter
10,509
6,645
113
Location
Camp Wood/LC, TX
I can't say for sure without doing research. I noticed the power pack on your loader was in-line and not like a M113 with the transfer case. The M113 transfer case is 1:1 ratio, and serves the purpose of making the power pack square so it will fit in the right front corner of the M113. Having the in-line power pack should make things much simpler for you as far as power swaps. As you know, SAE bellhousings are interchangeable as far as the SAE number, but the flywheel and torus are engine-specific. Basically you will have to find a Cummins flywheel designed for that model Allison. A 6V53 from a M113 might bolt right up however.
 
C

CBR Metalworks

Banned
526
6
0
Location
Winston-Salem, NC
I am going to try to put some fresh fuel and batteries in it tomorrow and see if it does anything at all. Would be nice to see if it runs at all, at least then I could include it with the one that I sell (if I sell one)
 
C

CBR Metalworks

Banned
526
6
0
Location
Winston-Salem, NC
Got the cargo platform pulled off the one unit, talk about a PAIN. Also pulled it about 1/2-3/4 mile down the road to it's permanent location (at least until it gets an engine). I had them dropped off at the end of a road nearby where I store stuff because there is no access for semi trucks where I park the stuff. The one with the engine in it I have not moved yet, I am planning to just order a new distributor for it and hope to get it running, then use the Cummins diesel I have to put in the one that did not have an engine.



 
C

CBR Metalworks

Banned
526
6
0
Location
Winston-Salem, NC
Well I have the hatch designed and built! FREEBIE :)

I have not decided if this will be put on the APC, or the "tank" yet. Guess I will have to get some bulletproof glass made for it if I want to keep it 'armored'.

 
You must log in or register to reply here.
111,237members
165,506threads
2,329,164posts
939online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks