What size are the threads on m35a2 brake lines

[LiveFreeOrDieTryn2B]

I need to know the thread size on the 5/16 fittings.

 

[LiveFreeOrDieTryn2B]

Looking into having some dot flex line made.

 

[hndrsonj]

http://www.steelsoldiers.com/showth...Set-for-the-DEUCE-BOBBER-M35A2-2-5-Ton-Trucks

Like these?

 

[LiveFreeOrDieTryn2B]

Yes but those are out of my price range just need thread size.

 

[welldigger]

Are you having fittings custom machined? Cause a hose shop should know what inverted flare fittings are.

 

[LiveFreeOrDieTryn2B]

I keep getting the run around about the size of the ends need exact size I do not have a thread gage.

 

[welldigger]

Which line are you having made?

 

[LiveFreeOrDieTryn2B]

The front and rear flex lines but putting a male on one end female on the other.

 

[welldigger]

Is this for a bobber? Cause the rear flex lines are double male. All 3 front flex lines are male into the wheel cylinder and female bulkhead fittings going into the hardlines. I just had all 5 lines redone at my local hose shop. Im trying to remember what sizes everything was. I just took the hoses in and they duplicated them.

 

[LiveFreeOrDieTryn2B]

I used a male fitting off the frame and yes its bobbed thats why I want hoses made.

 

[LiveFreeOrDieTryn2B]

I just need the info because of the sea of people that sometimes you have to over explain a simple thing to over the phone and its been really annoying so trying to simplify an already simple answer. They must have too much fluoride in there drinking water.LOL

 

[welldigger]

I know the hard line is the same size going into the tee as the male end of the flex hose. I'm wanting to say 5/16 but that could be wrong.

 

[gringeltaube]

Original rear flex lines are 1/2"-20 TPI, male on both ends, one end loose.

G.