• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

what truck uses v903 engines.

vt903

New member
2
0
0
Location
ga
I would like to know more about military trucks,I have 47 cj2a,small but alot of fun .I bought sum stuff GOV. Liq .I have v903 piston kits .I would like a bigger truck.Dont know.2 1/2 ton?
 

M813A1

Member
867
3
18
Location
OKC, Oklahoma
Yes the M123A1C 10 Ton 6x6 Tractor and the M125 10 Ton 6x6 Cargo truck uses the Cummins V903 engine !! it is basically a oversized Duece n Half or 5 Ton truck !! Check out the web site www.Olive-Drab.com there maybe a photos of those model of trucks !! The Cummins V903 was a mod done to those series of truck to replace the gas motor !!
 
Last edited:

DDoyle

Well-known member
Supporting Vendor
1,825
80
48
Location
West Tennessee
Yes the M123A1C 10 Ton 6x6 Tractor and the M125 10 Ton 6x6 Cargo truck uses the Cummins V903 engine !! it is basically a oversized Duece n Half or 5 Ton truck !! Check out the web site www.Olive-Drab.com there maybe a photos of those model of trucks !! The Cummins V903 was a mod done to those series of truck to replace the gas motor !!
The M123A1C that I own is powered by a Cummins V8-300 (as was every M123A1C the day it left the factory). The V8-300 superceded the LeRoi TH-844 gasoline engine in the G-792 (10-ton) trucks. While the V8-300 engine looks very much like a V903, they are not the same. In fact, darn few of the internal components will interchange between the V8-300 and the V903.

Best wishes,
David Doyle
 

NDT

Well-known member
Steel Soldiers Supporter
10,501
6,631
113
Location
Camp Wood/LC, TX
Fits the carrier engine in the 1970's Army American 2380 rough terrain 20 ton lattice boom friction crane. You are probably better off trying to find a customer that rebuilds marine engines.
 

vt903

New member
2
0
0
Location
ga
Thank you for imfo,Whats best buy for all around truck

I just want to tow my tractor and go off road :?:
 

Dirt71

Well-known member
490
738
93
Location
Jacksonville, Florida
The M123A1C that I own is powered by a Cummins V8-300 (as was every M123A1C the day it left the factory). The V8-300 superceded the LeRoi TH-844 gasoline engine in the G-792 (10-ton) trucks. While the V8-300 engine looks very much like a V903, they are not the same. In fact, darn few of the internal components will interchange between the V8-300 and the V903.

Best wishes,
David Doyle
:ditto: Its like aua trying to convince certain people of that fact! The M125 was only built with the LeRoi TH-844 But there was one prototype built with the V8-300.

Thanks David
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
Thanks to GL, I have MANY brand new exhaust valves for the 903 if anyone needs them. ;-)
 

BrianAnthony

New member
9
1
0
Location
Wentworth, NH USA
Back in the early '70s the Coast Guard 41 Ft. Utility-Patrol Boats (Aluminum Hull; Fiberglass Superstructure) had a pair of Cummins 903 Marine engines in them. We used to be able to go about 23-25 knots in the 41 boat depending on the sea state. I think I remember hearing that years later they replaced the Cummins with GM's. I was out by then.
 

Atomic

Member
410
10
18
Location
Albany, GA
I think I remember hearing that years later they replaced the Cummins with GM's. I was out by then.
As of 08' when I got out they were strill rebuilding them for the 41's. The newer 47's are powered by DD. Glad to another coastie is on here. I feel a little lost in the green world. :?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks