• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What's up with these M01097R1s???

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,590
113
Location
Papalote, TX
These are some strange trucks, very high serial numbers and mostly 6.5L GEP (probably de-tuned) and the 242 TC, otherwise they are like early A1 trucks, three speeds, V BELTS (UUGGG), etc.
 
Last edited:

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,590
113
Location
Papalote, TX
These are "rebuilds" but why the heck did they not upgrade these to A2s while they were spending a bazillion dollars on them.. or at least serpentine belts, what a waste..
 

colesmotorsports

Active member
63
131
33
Location
ND
I just bought one from Wisconsin about month ago , dang cool , runs great, ok I sound like a salesman lol just want to find lighter springs for the rear, payload says 4400 pounds , what the heck
 

Coug

Well-known member
Steel Soldiers Supporter
2,975
4,356
113
Location
Olympia/WA
I just bought one from Wisconsin about month ago , dang cool , runs great, ok I sound like a salesman lol just want to find lighter springs for the rear, payload says 4400 pounds , what the heck
1097 is the heavy variant, supposed to be able to carry heavier loads than the standard M998
 

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,931
9,590
113
Location
Papalote, TX
All the ones I have seen that have come up in Texas are three speed, and what they are getting for those junkers is amazing
 

fuzzytoaster

Well-known member
Steel Soldiers Supporter
4,299
3,132
113
Location
Fort Worth, Texas
All the ones I have seen that have come up in Texas are three speed, and what they are getting for those junkers is amazing
I watched most of these trucks sit and rot at Ft Hood for years. They'd get forked from area to area for inventory then forked again for demil. I mean.. it's tempting to get a running beater HMMWV for this cheap when you factor in shipping. I like the 1152 and 1165 better.
 

BruDogGA

Member
38
73
18
Location
Georgia
These are some strange trucks, very high serial numbers and mostly 6.5L GEP (probably de-tuned) and the 242 TC, otherwise they are like early A1 trucks, three speeds, V BELTS (UUGGG), etc.
I just bought a M1097R1 from the Pennsylvania depot. Got it for what I feel is decent price. Need to replace the hood and the speedo and the batteries. They were upgraded, as mentioned, to carry extra weight. Hopefully my wife doesn't have the opportunity to say "I told you so". It hasn't arrived yet.
 
Last edited:

colesmotorsports

Active member
63
131
33
Location
ND
Where would a person find lighter springs for the rear? Or what to look for ,numbers or something . Crazy rough in the back.
 

BruDogGA

Member
38
73
18
Location
Georgia
Where would a person find lighter springs for the rear? Or what to look for ,numbers or something . Crazy rough in the back.
I'm very green to the humvee world. But I would think you could find the springs for the previous variants of the 1097R1. It got a beefed up suspension with tougher struts, springs, control arms, sway bars, etc. to carry a heavier load. Not sure how much relief that would bring, but it's a start.
 
Top