Where to find a dozer blade?

[Bmchoug]

In a previous post, Another member told me that you could buy a flat blade for pushing dirt. Does anyone have an idea where I can start looking for dozer blades for my FLU419

 

[simp5782]

In a previous post, Another member told me that you could buy a flat blade for pushing dirt. Does anyone have an idea where I can start looking for dozer blades for my FLU419

Removed the bucket. Obtain skid steer attachments plate. And fabricate it to the front this will allow you to run any skid steer attachments including a blade

FLU419 Snow Plow

Hello, Wondering if anyone has any thoughts about how to go about fitting a snow plow on an FLU. It seems it was available as an attachment at some point. Any insight would be greatly appreciated. Thanks in advance. FB.

www.steelsoldiers.com

For high flow items to be used on the front like a bush hog you need to add a valve splitting the rear hydraulics so they can flow to the front while moving

 

[The FLU farm]

For high flow items to be used on the front like a bush hog you need to add a valve splitting the rear hydraulics so they can flow to the front while moving

I doubt that anything high flow would run well off the rear hydraulics. My low flow snow blower runs okay, though.

 

[RobySul]

Order one on the internet, this is the easiest way to find one, just need to know the model, so you don't buy one which doesn't suit to your dozer. Plus, you have to take in consideration potential work which you will have to do with the dozer, so you don't buy a blade which is too large or small for the work. You can find a large amount of models on machinerydealer.co.uk, from that number, you can easily find the best option for yourself, and the quality is one of the best on the market.

 

[frank8003]

Unimog Snow Plow

I need to part with my Unimog snow plow made by Schmidt Engineering. It is a 1979 MF3.4 snow plow with all hydraulics (10.5' wide x 3' tall). Fresh primer/paint, new wear blades, shock plates and limit pads. Tires are adjustable and hold air. This plow can move snow! Located in Eaton...

www.steelsoldiers.com

Tarron - AEBI Schmidt NA

Joomla! - the dynamic portal engine and content management system

www.schmidt-na.com

 

[Pinsandpitons]

One word of caution. The geometry of the schmidt loader is such that pushing things with it collapses the lift rams and lifts the front of the SEE. Doesn't work super great unless the stuff you're pushing is snow.

 

[The FLU farm]

Oh, they seem to be able to push dirt okay, too. Even when not using a real dozer blade.