• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Whip Antenna tie-down placement on a Slant-backs?

JetbikeAnt

Active member
136
125
43
Location
Elverson, PA
Good morning All. I am moving my Whip Antenna's from my M988 to my new M1045A2. It was easy to place the fixture to keep the Antenna's down with the Soft Top and doors. Would anyone be able to send me a picture of how to do this with a hard top and hard doors.? Not sure if the Antennas are correct for the Slant Back. Just really going for the cool factor. Thanks in advance!
 

Action

Well-known member
3,576
1,557
113
Location
East Tennessee
I have seen them tied to mirrors and around the b-pillar (at top of door).
if you think they may catch a branch, make sure to use the correct part of the clip. It will release with enough pressure.
 

JetbikeAnt

Active member
136
125
43
Location
Elverson, PA
Thanks for the tips gents. My first buggy with the soft top has them tied at the B Pillar. This is the most aesthetically pleasing location in my opinion. Please see my attached pick. I was worried that the up armored hard doors would damage the Lanyard as they are a tighter fit. If you do not think that will be the case I will place the Lanyard in the same location. Thanks again!!!
IMG_0552.jpg. If
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks