- 1,506
- 1,174
- 113
- Location
- TN
Anyone know what is best way to remove brass fitting white sealant on brake cans, without destroying the female fitting on the can? Thank you in advance!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
White sealant on brake cans-how to break free
- Thread starter Reworked LMTV
- Start date
Ronmar
Well-known member
- 3,845
- 7,474
- 113
- Location
- Port angeles wa
Sealant around the airfitting? You could apply some localized heat.
- 5,614
- 2,922
- 113
- Location
- Metairie/La (N'awlins)
Is that white sealant for threaded fittings or silicone gooped to watertite?
If just pipe sealant tape or putty, It should just unscrew with no force as it is not a thread lock product but just a thread sealer.
If just pipe sealant tape or putty, It should just unscrew with no force as it is not a thread lock product but just a thread sealer.
- 1,506
- 1,174
- 113
- Location
- TN
It is not straight pipe sealant, from what I can see.
- 1,506
- 1,174
- 113
- Location
- TN
Yes, the brass air fitting sealant. Looks like pipe sealant, but is hard as a rock.
- 2,034
- 5,224
- 113
- Location
- Portland, OR
It's almost certainly PTFE sealant - it does harden with age. Heat will help but also proper fitting tools and especially line wrenches if you can get them in there on the fitting - they don't round off brass fittings like that as easily.