will be doing the bodywork on my truck on Sun.-Tues.

[CCATLETT1984]

I have to replace the floor pans the rockers and patch the rear lower cab corner on both sides. If I get the time I will be installing the new inner fenders that I have had for the last 2 years, and might get around to fixing the minor rust behind the rear wheel opening. wish me luck, will take pics and post when done.

 

[Armada]

Good luck. Take some 'before' and 'in progress' pics too. Have it ready for the trip to Clare!

 

[CCATLETT1984]

I will take the during pics, hoping to be able to go to claire.

 

[CCATLETT1984]

I have the pics of the spray-in bed liner material applied to the cab floor. I replaced the driver's side floor pan and rocker. I decided to do the cab corners later this summer when the bed comes off, as it would be nearly impossible to weld the new ones on with the bed in the way.
I'll post the pics later today,maybe tommarrow.

 

[CCATLETT1984]

finally, here are the pics


sorry havin camera issues.

 

[Hookin1]

Looks good nice job...

 

[bigmike]

Looks good. You got me thinking about putting spray-in bed liner on my cab floor as well. Can you paint over it or just settle with the color it comes in?

 

[CCATLETT1984]

Thanks for the comps.



I think you can get it in a few colors, but I dont think that regular paint would stick very well.

when applying it, be sure to prep the area very well. otherwise it wont adhere properly.