rfischba1
Member
- 419
- 1
- 16
- Location
- Fort Meade MD
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I'm running these on my 1028 as well with no lift and a little trimming. I did have to put a slightly longer steering stop screw on the drivers side to prevent rubbing the pitman arm tie rod end.I am running them on my M1028 and all I had to do was clip the rear inside fender lip. I only get a slight rub in extreme off road twisting while turning. They are a good tire. A larger fender clip would solve this but I wanted to keep the stock look from the side of the fender.