davidb56
Well-known member
- 1,020
- 1,237
- 113
- Location
- Bonners Ferry Idaho
@ Cattleman..agree about salt. fortunately the car/truck wash has a underbody sprayer just for that exact reason.
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thats what I was thinking, but it would be outside and made of 6 in steel pipe casing, because I don't have a "inside". In fact, I don't have a slab either, so when it rains, I use a 1 inch thick sheet of plywood treated with used diesel engine oil (really) and when it snows, I use cardboard. Its a good thing it doesn't get below -10F often.[/QUOTE
-10??? Don't think so...
Amen; If you really want to prevent rust, mix diesel and chainsaw bar oil in a pump up sprayer and mist the entire underside of the truck. The phosphoric acid in the oil with actively attack any existing rust/prevent new, and help salt and mud fall right off"I think you're missing out, not driving the truck in the snowy winter.
Just hose off the chassis after driving it."
You and your tactical military vehicle are not going to last forever.
Sounds like you just need to build a giant, heated/indoor drive-thru, sonic cleaner.I get nervous about the underbody sprayers. Sure, fording is one thing, but pressurized jets applied to the underside? I'm nervous about that with my daily driver. Factor in freezing temperatures and you'd probably just freeze everything up. Yes?
No...not any different than driving through snow slush. the spray is warm too. Ive been using it for years and is real popular up here because of salt.I get nervous about the underbody sprayers. Sure, fording is one thing, but pressurized jets applied to the underside? I'm nervous about that with my daily driver. Factor in freezing temperatures and you'd probably just freeze everything up. Yes?
First I ever heard of this formula:Amen; If you really want to prevent rust, mix diesel and chainsaw bar oil in a pump up sprayer and mist the entire underside of the truck. The phosphoric acid in the oil with actively attack any existing rust/prevent new, and help salt and mud fall right off
Where do you pick up something like that, davidb56?Thats what I was thinking, but it would be outside and made of 6 in steel pipe casing, because I don't have a "inside". In fact, I don't have a slab either, so when it rains, I use a 1 inch thick sheet of plywood treated with used diesel engine oil (really) and when it snows, I use cardboard. Its a good thing it doesn't get below -10F often.
its sideways (why?) so the rain rolls off while I weld.
Car washes recycle the water with the salt in it.@ Cattleman..agree about salt. fortunately the car/truck wash has a underbody sprayer just for that exact reason.
I guess you have to experience Northern Idaho to see what actually works. 8 years ago when I first moved up here, my doors froze. Then someone told me to use spray silicon on the door gaskets, now they always open. There is a line every winter at the Bonners Ferry car wash that sprays the underside down. If it didn't work, eventually people would wise up. Im under my vehicle doing maintenance all seasons, and I know it helps. So...I'll do what I know best for me, and others can do whatever they want. Im not going to let winter "hibernate" the best vehicle made to do the job....M35A2C. period. But thanks for the concern...I know car washes are able to reclaim water, but I'd hope it gets filtered or desalinated. Otherwise what's the point?
I'd be hesitant getting a car washed in the winter anyway. It's a good way to freeze your doors shut, nevermind anything underneath that it might freeze up. I think about how the Germans had to take a torch to their interleaved road wheels on their tracked equipment because they'd be frozen together! Same with some construction equipment I've seen.
First I ever heard of this formula:
- Where did you come across this "recipe", Elijah95?
And any magic ratio to the mix?
You got us interested plenty, Elijah95!I've learned a lot in this thread, that's for sure. I'm curious about the motor oil/diesel underside coating. Does that last for just one season? I can't imagine that being particularly healthy for the paint underneath, but I could be wrong.
I was mistaken. It's chainsaw bar oil, not motor oil. But still mixed with diesel.Amen; If you really want to prevent rust, mix diesel and chainsaw bar oil in a pump up sprayer and mist the entire underside of the truck. The phosphoric acid in the oil with actively attack any existing rust/prevent new, and help salt and mud fall right off
1:1? 1:10?I was mistaken. It's chainsaw bar oil, not motor oil. But still mixed with diesel.
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!