My wipers worked but would not return to the bottem when turned off and the water pump on the wiper motor would not pump water. So, I went to the dealer and got a new (rebuilt) motor. Got it installed and the wipers ran good and returned to the bottom fine. Then I tested the water and everything stopped. No water and no wipers.
The wiper motor has three wire connectors. Two are designed so the wires can only attach in the correct direction. The third (a two wire connector at the center top)(red and white wires in mine) let you connect either way. Thought maybe I hooked it up backwards. Could someone tell me how they have it hooked up? Is the red to the left or right when you are looking at it?
That was my only thought. Any other ideas?
The wiper motor has three wire connectors. Two are designed so the wires can only attach in the correct direction. The third (a two wire connector at the center top)(red and white wires in mine) let you connect either way. Thought maybe I hooked it up backwards. Could someone tell me how they have it hooked up? Is the red to the left or right when you are looking at it?
That was my only thought. Any other ideas?