Another Ahab
Well-known member
- 18,003
- 4,565
- 113
- Location
- Alexandria, VA
That's what makes this SS forum so great:
- Can't none of us think of everything all the time, you know?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your 5 ton this week?
- Thread starter dezert ratt
- Start date
- Can't none of us think of everything all the time, you know?
The guys name is Ken Spencer. I am not sure if I got it through here or on FB. Was $250 and comes with new fuel lines fraom tank to pump. This guy is who I got it from and he offers other stuff too.
http://www.steelsoldiers.com/showthread.php?144836-Dual-fuel-line-kit-for-the-NHC-250-Cummins
Last edited:
NovacaineFix
Member
- 662
- 1
- 18
- Location
- San Diego, California
Field stripped and repaired my poppet valves on a picnic bench for the M818.
Went offroading to get to the SoCal Rally that Blendmaster hosted and apparently got some water/sand/crud in the vent hole that made it's way into the air valve.
Caused the truck to lose air and we all know, no air, no brakes.
In reverse, the air held fine, but shift into neutral or any forward gear, it would dump air out of the vent.
So my options were, drive home 150 miles in reverse, or take the valves off, clean then and hope that it was fixed.
Well, I took the valves off, along with the 2 airze lines and the hydraulic line, syphoned some fuel out of one of the tanks into a quart sized oil container to use as a parts washer, and proceeded to disassemble the valves.
I have never done this before, so without the help of all the guys in the group, I would have been stuck, bjg-time.
Anyway, cleaned the valves, reinstalled them, attached the air and hydraulic lines, started the truck up,let it build up aur pressure, and she works perfectly.
Made it all the way glhome without and issue.
Thanks to the guys at the SoCal Rally for their help.
If you haven't gone to one of their events, I suggest you do, a great bunch of guys.
Sorry no pictures, hands were covered in diesel and dirt.
Went offroading to get to the SoCal Rally that Blendmaster hosted and apparently got some water/sand/crud in the vent hole that made it's way into the air valve.
Caused the truck to lose air and we all know, no air, no brakes.
In reverse, the air held fine, but shift into neutral or any forward gear, it would dump air out of the vent.
So my options were, drive home 150 miles in reverse, or take the valves off, clean then and hope that it was fixed.
Well, I took the valves off, along with the 2 airze lines and the hydraulic line, syphoned some fuel out of one of the tanks into a quart sized oil container to use as a parts washer, and proceeded to disassemble the valves.
I have never done this before, so without the help of all the guys in the group, I would have been stuck, bjg-time.
Anyway, cleaned the valves, reinstalled them, attached the air and hydraulic lines, started the truck up,let it build up aur pressure, and she works perfectly.
Made it all the way glhome without and issue.
Thanks to the guys at the SoCal Rally for their help.
If you haven't gone to one of their events, I suggest you do, a great bunch of guys.
Sorry no pictures, hands were covered in diesel and dirt.
thunderechief83
Member
- 131
- 0
- 16
- Location
- dickinson,tx
busy week! added new convoy lights "green" , new data plates, labels, marker lenses, new super rope and a couple of places to set the riflesgrayparatrooper
Member
- 121
- 0
- 16
- Location
- Dallas tx
where did you get the rifle mount?
General Hood
Member
- 712
- 2
- 18
- Location
- Fort Towson, OK
Pulled the 923A2 up to contractor loading dock at Home Depot and said "fill her up boys", then hauled up the mountain to build a hunting cabin. The trooper at the weigh station just shook his head and waved me on 
thunderechief83
Member
- 131
- 0
- 16
- Location
- dickinson,tx
I got it off of ebay from Memphis Equipment all three gun mounts for $65.00. you might be able to go to their web site and get it. Nos not a scatch on them , looked brand new.
grayparatrooper
Member
- 121
- 0
- 16
- Location
- Dallas tx
what are they called i cant seem to find them lol
thunderechief83
Member
- 131
- 0
- 16
- Location
- dickinson,tx
thats ok, look for "mecoparts" thats thier seller name on ebay.
thunderechief83
Member
- 131
- 0
- 16
- Location
- dickinson,tx
i just did a search on their ebay store. they sold all 20. if I find any others I will PM you.
thunderechief83
Member
- 131
- 0
- 16
- Location
- dickinson,tx
c&c parts has it on ebay as well for $79.00. seller name clintdigger97. store front name c&c equipment.
todds112
Member
- 672
- 5
- 18
- Location
- Teton Valley, ID
Thanks for pics, on my list to do. Does the one on the door interfere at all getting in and out of the truck? I'm concerned I might continually smash my elbow on the lower bracket climbing out.
Another Ahab
Well-known member
- 18,003
- 4,565
- 113
- Location
- Alexandria, VA
A little drift here, but wondering what you got going on in the second pic:
- Looks kind of like an AK-47, but I'm not sure it is; and with a stainless steel bolt...
What you got going on there?
Piper Cub
Member
- 649
- 2
- 18
- Location
- Palmdale, Ca / Flagstaff, Az
Soviet SKS, predecessor to AK.
Ya those are just standard issue sks 7.62 rifles, ammo is cheap and they are fun to shoot. Todds112 you do have to make sure you open the door a fair bit upon exiting, but I have never bumped into them yet. Takes away a bit of elbow room while driving, but very manageable. I take my truck to the bush a lot and the rifle mounts actually work great for holding axes and pickeroons as well
- 1,654
- 1,669
- 113
- Location
- Nova Laboratories, WA
Started up the M934.. Been noticing that the last couple of times, it's been starting slower and slower.... then noticed that the battery meter was in the red.. Whoops!
Checked the batteries, seemed fine albeit low on juice.. tapped gauge.. no change... Pulled out my multimeter, about to check for voltage from the alternator....
Popped the hood and... no output from alternator..... I kill the engine..
then.....
I realize that both belts are missing from the alternator, and the pulley is loose/wobbly.
Methinks it puked the woodruff key... will dig into it tomorrow..
Those keys are everywhere but nowhere, can't find ANY details or specs on the key used on that alternator... Ugh.
Checked the batteries, seemed fine albeit low on juice.. tapped gauge.. no change... Pulled out my multimeter, about to check for voltage from the alternator....
Popped the hood and... no output from alternator..... I kill the engine..
then.....
I realize that both belts are missing from the alternator, and the pulley is loose/wobbly.
Methinks it puked the woodruff key... will dig into it tomorrow..
Those keys are everywhere but nowhere, can't find ANY details or specs on the key used on that alternator... Ugh.
- 1,958
- 427
- 68
- Location
- Culver City, CA
I assume your truck is an "A0" or A1. Here's your spec....
http://www.parttarget.com/5315-00-6...45.html/-BE92B41E-CBD8-41FB-A785-3F745815AA06
Its a #5.
http://www.mcmaster.com/#woodruff-keys/=z4hv4h
Last edited:
- 737
- 14
- 18
- Location
- Bothell, WA
EGT installed, last RCL's mounted. Total count is 14. Daylight on demand.
Painted a few things, like the bed crane and chocks. Got a car show at work this week. Should be interesting, assuming security and facilities can agree where I can park.
Painted a few things, like the bed crane and chocks. Got a car show at work this week. Should be interesting, assuming security and facilities can agree where I can park.
- 1,654
- 1,669
- 113
- Location
- Nova Laboratories, WA