What did you do to your deuce this week?

[texas30cal]

Elijah95.... The protectors are available on the popular auction site, search the nsn # shown above. They have a sorry rubber coating that rusts underneath before you even get them out of the package. Soak in lacquer thinner to remove then blast and prime/paint. I made a pliable rubber gasket to put between it and the firewall with a id a little smaller than the harness. BETTER than new!!!

 

[Tracer]

Replaced the turn signal flasher control unit, checked the oil in all 3 axles, transmission, and transfer case.

 

[Tracer]

The winch driveshaft is installed, and the winch serviced. My first winch installation and no leaks. The SS archives and TMs were a big help.

 

[speedfellon]

Nice job Tracer. I will check it out next week at the meet.

 

[Tracer]

Nice job Tracer. I will check it out next week at the meet.

10-4 looking forward.

 

[Elijah95]

Figured out it fits in my local Mcdiddleys drive through

 

[Migginsbros]

Tracer, the deuce named M3... ? What´s years they were build? Is this one someone to save?
See´n in the neighborhood. Perhaps it is obtained.

 

[winfred]

m109a3, looks to be pretty nice from the one pic

Tracer, the deuce named M3... ? What´s years they were build? Is this one someone to save?
View attachment 676049 See´n in the neighborhood. Perhaps it is obtained.

 

[Another Ahab]

Figured out it fits in my local Mcdiddleys drive through

It fits like a glove.

 

[Elijah95]

did a little suspension exercising

 

[Elijah95]

Also unrelated, but sold my Cummins today and now it's M923a2 or M925a2 time

 

[tobyS]

Also unrelated, but sold my Cummins today and now it's M923a2 or M925a2 time

If you go 923a2 and want to add hydraulics, while they last I have some NOS PTO's for cheap. See ad "PTO for 939 series"

 

[tobyS]

View attachment 676172View attachment 676173 did a little suspension exercising

The G177's look nice, lots of area in contact. You know the 14.5 aka 365 is the same rev/mile so you could go wide on the front

 

[Elijah95]

The G177's look nice, lots of area in contact. You know the 14.5 aka 365 is the same rev/mile so you could go wide on the front

Ironically I was kind of curious about something to widen my narrow track up front, that's for the tid bit

 

[tobyS]

Ironically I was kind of curious about something to widen my narrow track up front, that's for the tid bit

A couple of the A3 wheels and tires would do it.

 

[Aussie Bloke]

G'day everyone,....


Yesterday I took the passenger seats out and I'll take them to be recovered tomorrow on my way into work,....
I've already had the drivers seat base recovered so all I have left to do is the drivers seat back.


Pics coming once the whole project is done.



Oh, anyone know where I might get the original style seatbelts from?


Aussie.

 

[winfred]

vacuumed the mouse turds out of the cab, installed thread inserts for the missing bolts for the tunnel covers, lubed and adjusted the springer seat and properly attached backrest on passenger seat, finished up plumbing the air for the sprag transfer caseectomy/reman air shift install and verified function of 6x6 (and strong likelihood someone installed a detroit locker in the front diff) then solved the problem of not being able to steer with 395s with avm hubs, got my air wipers working with a needle valve when the new stock valve failed to pass air and was unable to be repaired reliably (would suddenly pop wide open and blow the lines off), used a choke cable to replace the missing heater duct cable and got the defroster duct cable moving and decrapped the ductwork/air plenum. probably some other crapola but the last couple weeks are blending together of transfer case brake/bearing service and 395 installation.....

 

[Another Ahab]

That was a good productive day.

 

[Elijah95]

Took the rig to WWII days in peachtree city, met many good folks. More pictures and a post all on its own to come!

 

[nchittendon]

Went to the tire shop to get my tires mounted up. Found out I had the wrong orings, so there they sit awaiting the right ones.