• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M925a2 Power Surge

74M35A2

Well-known member
4,145
330
83
Location
Livonia, MI
Solar almost done. Then dog bone links, both rear axles are held in place with ratchet straps right now. Probably not very conducive to receiving 400hp. Then engine swap. Hold tight.
 

Jbulach

Well-known member
Steel Soldiers Supporter
2,661
2,194
113
Location
Sunman Indiana
He’s a dried up alcoholic coconut?? No wonder nothing gets done.

Is there a “Fake News” forum we can move this too?

Just jukes 74 we ruv yu rong tine!
Nah, just jealous of his engine swap, solar project and pic of the tasty Hawaiian beverage.
I have a truck with a trashed motor, around 10,000 sq ft or roof I’d love to load up with panels and hopefully make it to Hawaii in a few years to do some sampling, but wont be getting paid to do it.
 

74M35A2

Well-known member
4,145
330
83
Location
Livonia, MI
Don’t lighten up, the weak are killed and eaten. Don’t be jealous of 3 broken torque link rod ends, you’ll have them also.
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,758
113
Location
Monrovia, Ca.
He really DOES have a truck! Wait....could be a stolen pic from the interwebs....
 

Buffalobwana

Well-known member
Steel Soldiers Supporter
1,394
178
63
Location
Frisco Texas
The relationship of the speed of motor swaps compared to the condition roofs in the background photos seems to be directly unproportional in some way. (Simp vs 74’) ownership of said roofs not withstanding.

Coincidence? I think not.

Thats all all I got this morning. Carry on gentlemen.
 

Jbulach

Well-known member
Steel Soldiers Supporter
2,661
2,194
113
Location
Sunman Indiana
Ha! I was going to say the siding on that shed could use some attention, but was afraid it might throw a wrench in the progress on the truck.
 

WillWagner

The Person You Were Warned About As A Child
Super Moderator
Steel Soldiers Supporter
8,539
2,758
113
Location
Monrovia, Ca.
I have seen an ENGINE run backwards. When was the last time you saw your engine run, forward, backward, at all?? :shrugs:

Just poking you with a stick!!
 

Jbulach

Well-known member
Steel Soldiers Supporter
2,661
2,194
113
Location
Sunman Indiana
It’s a good thing they don’t put the shiny little wheel that spins on the meters any more, he’d never get anything else done...
 

74M35A2

Well-known member
4,145
330
83
Location
Livonia, MI
So, ummmm, let’s see how many people I can make mad. I just had a Cummins ISX 15L engine land in my lap. Anybody have an M939a1 or first gen front engine mount frame cross-member, rear mounts, and doghouse (both for NHC-250)?

I’ll probably still go ahead with the ISL-400/13 speed since it is already done, together, and converted to 24v. I don’t think the Eaton/Fuller RTO-12513 trans would be up to 2,200ft-lb of torque, it is rated at half of that. But if I kept the truck unloaded and was nice to it.... I’d have to drive it to the GA ralley just to give everybody the business...
 

Jbulach

Well-known member
Steel Soldiers Supporter
2,661
2,194
113
Location
Sunman Indiana
Sweeeet! Motor for your trailer??? All you need is a hefty auto, an on off switch for a throttle...
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks