f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
We recently purchased a m109a3 located in philly and we reside in nor cal. Our question is, how many miles can one expect out of 900x20 ndt ties?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Tire mileage
- Thread starter f3504x4
- Start date
- 10,436
- 6,486
- 113
- Location
- Camp Wood/LC, TX
On the front, from philly to nor cal.
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
Put new tires on the front steer axles and use the takeoffs as spares.
Get your tools ready. Is this like a 16 day drive?
Get your tools ready. Is this like a 16 day drive?
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
Not sure how many days. I take it 900x20 tires wont last long? And i do not know 4 digit number on any of the tires. It will be an adventure im sure. Will a bottle jack raise unit enough for tire r&r? Thank you for taking the tome to respond.
Ron
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
Thank you for the information. Where can someone purchase new 900x20 ndt tires?
Thank you in advance.
There isn't that is reasonable
If you want to swap tires go to g177s in 1100r20. Will increase your road speed and they wear like iron. Takes alot to wear em down
11.00R20 GOODYEAR G177 LIGHTLY USED 80 - 95% TREAD | eBay
Freight is from Norfolk, VA. Whether or not there is a forklift for unloading.
www.ebay.com
- 10,436
- 6,486
- 113
- Location
- Camp Wood/LC, TX
They will be worn out on the front axle after travelling 3000 miles from Philadelphia, PA to Crescent City, CA.
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
Thank you, will the1100x20 tires rub on the drivers due to larger circumference?There isn't that is reasonable
If you want to swap tires go to g177s in 1100r20. Will increase your road speed and they wear like iron. Takes alot to wear em down
11.00R20 GOODYEAR G177 LIGHTLY USED 80 - 95% TREAD | eBay
Freight is from Norfolk, VA. Whether or not there is a forklift for unloading.www.ebay.com
Ty in advance
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
That is good news!
- 6,074
- 4,435
- 113
G177s dualled on the back of a deuce will rub slightly on a trunnion cap bolt head.
f3504x4
Member
- 48
- 15
- 8
- Location
- crescent city ca.
Very good to know , thank you once again.
- 6,074
- 4,435
- 113
My opinion, not that you asked for it- run with what you have . You have plenty of spares. Change out to 395's on mrap rims with spacers at some point in the future.
G177s look good on a deuce. The clearance is just barely not enough and they don't hit all the time, just intermittently. There's a solution that will allow them to be used. I don't remember what it is, probably something like a small spacer.