• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Help with a couple auction pics - name that part...

blutow

Well-known member
357
501
63
Location
Austin, TX
I'm working to ID and evaluate some gov planet trucks I want to bid on. I kind of know what to look for on general condition, but I"m new to HMMVW's and don't really know when to be concerned when I see a part laying around or something that looks "off". Here's a pic of a disconnected/hanging harness. The truck is very clean, starts/runs fine per description and video, but this doesn't look right. Maybe something they reconnected before starting it? Anything to be concerned about?

1631634408487.png

Here's a pic from another really clean truck. Looks like a loose bracket laying on the floor. I see loose parts sitting in a lot of these trucks, so I'm not too concerned, but just curious what it is and whether it might indicate a problem with a critical system being disassembled
1631634758947.png
 

Attachments

blutow

Well-known member
357
501
63
Location
Austin, TX
Looks like the harness for the light switch as some of the screws are not in the dash switch.

2nd one is a battery hold down as the batteries are under the passenger seat.
Thanks for the quick response. I was thinking possibly lights given the locaton, but the auction says that all lights are operational. Probably a mistake on their part. Maybe they plugged it in and then checked the lights. Either way, probably not a show stopper but maybe indicative of a problem someone was troubleshooting at some point. The battery hold down was my only guess on the 2nd pic given the location right next to "24v", thanks for the info.
 

blutow

Well-known member
357
501
63
Location
Austin, TX
Don't bid on that truck! You don't want it! It's not the one you are looking for!

(or you'll be bidding against me!)
Your jedi mind tricks won't work on me.... But seriously, I'm not sure I'm even going to bid on anything tomorrow. I know so little about these things and don't want to make a dumb move just yet. Probably a little more research, or just low ball a couple really nice trucks to make sure I understand the mechanics of the auction process.

When I get ready to bid for real, I'll be dangerous for sure. I've got more $ than brains. I don't actually have that much $, but I'm willing to get a little stupid once I get things figured out.
 

M1165A1

Well-known member
406
843
93
Location
The High Country, CO
Your jedi mind tricks won't work on me.... But seriously, I'm not sure I'm even going to bid on anything tomorrow. I know so little about these things and don't want to make a dumb move just yet. Probably a little more research, or just low ball a couple really nice trucks to make sure I understand the mechanics of the auction process.

When I get ready to bid for real, I'll be dangerous for sure. I've got more $ than brains. I don't actually have that much $, but I'm willing to get a little stupid once I get things figured out.

In all seriousness (I wasn't really bidding on any trucks now) I would hold off until some nicer trucks emerge. The ones on auction have been quite rough compared to six months ago.
 

Guyfang

Moderator
Staff member
Moderator
16,427
23,374
113
Location
Burgkunstadt, Germany
Since there are still lots of trucks in the system that use that turn signal arm, and that arm goes bad often, who do you think might be interested in taking one?
 

papakb

Well-known member
2,285
1,184
113
Location
San Jose, Ca
That POS turn signal switch is the most fragile piece of equipment on the HMMWV! Whenever I go to a show where the truck is open for inspection it's the first thing kids grab and yank around. Why they kept using it is beyond me.
 

Guyfang

Moderator
Staff member
Moderator
16,427
23,374
113
Location
Burgkunstadt, Germany
They continued to use the POS turn signal switch, because the army has been using that switch since St Peter was a corporal. It is the same switch used on every vehicle from jeeps, 2 1/2 tons, 5 tons of every description, and so on.
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,634
19,594
113
Location
Charlotte NC
They continued to use the POS turn signal switch, because the army has been using that switch since St Peter was a corporal. It is the same switch used on every vehicle from jeeps, 2 1/2 tons, 5 tons of every description, and so on.
.
That's a shame. I remember when a new truck (40's 50's vintage) arrived at the shop, we would rip out the military lights and switches and wiring. Everything was rewired with new switches and a new Signal Stat turn signal switch. Those parts would get dropped into a 55 gallon drum. Hate to say I don't remember what happened to them. Might have been the scrap dumpster for all I know now...

Signal-Stat.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks