- 6,930
- 9,587
- 113
- Location
- Papalote, TX
I get mine direct from AMG that way I can be sure they are OEM quality
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your HMMWV today/lately
- Thread starter Warthog
- Start date
- 753
- 1,332
- 93
- Location
- Highland, Indiana
New mil spec green rear curtain to replace my Arctic curtain. Blue ox tops.
- 6,930
- 9,587
- 113
- Location
- Papalote, TX
Blue OX Tops? all I see is civy trailer stuff.New mil spec green rear curtain to replace my Arctic curtain. Blue ox tops.
- 753
- 1,332
- 93
- Location
- Highland, Indiana
- 1,330
- 586
- 113
- Location
- Quantico VA
Interesting. I dropped off that Fecebook group he was selling in bc of too many morons in it. That was before he came out with these. Fun fact: I tried to sell my soft slant back design to WW but he didn't want it. I was developing improved rear curtains but it looks like WW beat me to it...
Bulldogger
- 753
- 1,332
- 93
- Location
- Highland, Indiana
I was looking for a rear curtain and just happened to message him and he had this green one.
I do see that Midwest Military Equipment in August will have new tops, doors and curtains. Looks like someone is making them again.
SmartDrug
Well-known member
- 211
- 304
- 63
- Location
- Saint Charles, IL
Where did you read that about MME? Not questioning it, but curious!
- 753
- 1,332
- 93
- Location
- Highland, Indiana
A little spicy at 1500 for doors. https://midwestmilitaryequipment.com/green-soft-doors-for-humvee-hmmwv-set-of-4/
Top and rear curtain pretty good price. 1099. https://midwestmilitaryequipment.co...n-soft-top-kit-rear-curtain-for-hmmwv-humvee/
- 753
- 1,332
- 93
- Location
- Highland, Indiana
Do you make tops and curtains?
- 1,330
- 586
- 113
- Location
- Quantico VA
I'm close to having a set of rear curtain designs I am satisfied with (at least for beta testers to try out). I have some 2-man versions ready, but still have to finish the 4-man design. I don't make tops and don't plan to. Way too much sewing in one of those. You didn't ask but I'll offer that I am about to resume making and selling soft slant back kits (steel frame kit and cover, arrives ready to assemble and install). I just have to finish the wife's bathroom reno first.
BDGR
GuntherRommel
Well-known member
- 264
- 525
- 93
- Location
- Bend, Oregon
Very interesting, I would love to see a pic. Sounds awesome
- 1,330
- 586
- 113
- Location
- Quantico VA
I'll be sure to contact you directly.
Are you looking for 2-man, 4-man w rear seat belt mounts or 4-man without belt mounts? I figure on making 2-man and 4-man seatbelt. I wonder how many folks have 4-man without rear belts. And what color? I've green, tan and black fabric on hand. No camo scheme yet.
Bulldogger
GuntherRommel
Well-known member
- 264
- 525
- 93
- Location
- Bend, Oregon
I have a camo 4 man soft top with soft doors and 4 seat + belts. But I love the idea of a 4 man soft slant back. Sounds amazing
- 1,330
- 586
- 113
- Location
- Quantico VA
Here's a thread on my design with plenty of posts from others in as well. The thread has a link to the development thread as well.
HMMWV 4-man Soft Slant Back Feedback and Discussion
While my Prime account is in processing so I can post to the classifieds, I’ll open this new thread to allow for new thoughts and conversation to go beyond my original thread for development of this concept...
www.steelsoldiers.com
I made a tan slant back for a fellow in Maryland late 2021. I'm poised to resume production of soft slant backs in late April early May. I'm chained to the master bathroom renovation at present, but my wife promises me some months to do other things (by which I understand some things I want to do, and some things she wants me to do, but not renovations). I'll take what I can get.
Feel free to contact me by PM (Conversation) to continue our discussion. At this time, you'd be first in line for the next slant back, though I'm not ready to accept a deposit just yet.
BDGR
GuntherRommel
Well-known member
- 264
- 525
- 93
- Location
- Bend, Oregon
Looks great man, I want one in black or green and will paint it camo. Nice work
visualg
Member
- 36
- 42
- 18
- Location
- Boca Raton, FL
Where did you get them from?
- 753
- 1,332
- 93
- Location
- Highland, Indiana
What have I done for my Humvee today? I got it a play friend to pull around. 320 Miles to Sparta, Wi. and back. It will get painted 383 Green to match truck.
Also a few pictures of the other goodies in the yard. Got to drive a 8x8, too bad out of my range.
Also a few pictures of the other goodies in the yard. Got to drive a 8x8, too bad out of my range.
Attachments
Last edited:
Caactus
Active member
- 81
- 199
- 33
- Location
- NW Phoenix, Arizona
Helped a friend pull the rims out of 6 used up/aged out HMMWV tires to prepare them for disposal today. Then put run-flats in 4 new Baja tires and mounted them on four of the rims and set them aside for future use. First time messing with run-flats .. actually wasn’t as bad as I was anticipating. We’re actually gonna pull the wheels back off another vehicle we just installed new tires on so we can add run-flats…that thing is a fully armored beast and I’d hate to see it blow a tire on the highway with out them.
Next up.. pulling the run-flats OUT of the old tires so they can be taken to recycling. I hear that’s a pretty messing job.
Next NEXT up..Waiting to get a new to me Rhino tire carrier to mount. Anyone know how they mount over the mud flap on an air bumper? Never mind…I’m sure it’s detailed in another thread somewhere. Just trying to figure out what they recommend for spacers on the left side bolts.
Next up.. pulling the run-flats OUT of the old tires so they can be taken to recycling. I hear that’s a pretty messing job.
Next NEXT up..Waiting to get a new to me Rhino tire carrier to mount. Anyone know how they mount over the mud flap on an air bumper? Never mind…I’m sure it’s detailed in another thread somewhere. Just trying to figure out what they recommend for spacers on the left side bolts.
Caactus
Active member
- 81
- 199
- 33
- Location
- NW Phoenix, Arizona
Mattguy- Looks factory which is absolutely my preference. What did the project end up costing you? Is there any issue finding 24v h4?
- 753
- 1,332
- 93
- Location
- Highland, Indiana
It's way cheaper than led complete lights. And looks just like stock. I went with cheap hella knockoffs that didn't fit then purchased the real deal. $35 a piece from Amazon.
HELLA 002395031 HLMP 7" 165MM H4 ECE,2395031 https://www.amazon.com/dp/B005OULUQO/ref=cm_sw_r_apan_i_ET1DACXFCW0X5QN4F5WG?_encoding=UTF8&psc=1
Any h4 led bulb will work, all you need is h4 pigtails to match up with the factory wiring. You can cut wires off old bulbs!
In the listing for led h4's they will show you voltage range. I used these and they are perfect and cheap.
Limited-time deal: OXILAM Mini Size H4 9003 LED Headlight Bulbs, 12000LM Hi/Lo Beam Wireless 6000K White Super Bright LED HB2 Bulb for Car Motorcycle Conversion Kit, Fanless Replacement Bulbs, Pack of 2 https://www.amazon.com/dp/B09HS7499B/ref=cm_sw_r_apan_i_dl_HF50QA15DWDETDSMMCFE?_encoding=UTF8&psc=1