- 34
- 5
- 8
- Location
- Atkins AR.
What is the wiring diagram numbers for the gauges
Temp?
Fuel?
Batt?
oil pressure?
high beam?
dash lights?
Temp?
Fuel?
Batt?
oil pressure?
high beam?
dash lights?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
HMMWV gauge panel wiring diagram
- Thread starter js0276
- Start date
- 6,883
- 9,531
- 113
- Location
- Papalote, TX
Not sure what you are asking for, the wire numbers are on the applicable schematic, there is no schematic for the instruments only, just complete vehicle schematics.
Here is a schematic that the numbers are clear on, as far as the instruments all HMMWVs are about the same.
Here is a schematic that the numbers are clear on, as far as the instruments all HMMWVs are about the same.
Last edited:
- 34
- 5
- 8
- Location
- Atkins AR.
What are the wire numbers that plug into each gauge?
Temp?
Volts/BATT?
Fuel?
oil pressure?
- 3,569
- 3,474
- 113
- Location
- Brooklyn, NY
You are now realizing that there are technical manual on this bulletin board that are free. Mogman is strongly implying that you need to go through the technical manuals on your own to search out the circuits
- 34
- 5
- 8
- Location
- Atkins AR.
WOW
Lot of good helpers on this site!
Thought maybe someone already had it written down some where
GUESS I WAS WRONG!!
- 3,569
- 3,474
- 113
- Location
- Brooklyn, NY
US gobment rote it down for ya’ wit letters an’ pitchers and ebythin’
It’s all there. Seriously. Diagrams too.
Last edited:
- 6,883
- 9,531
- 113
- Location
- Papalote, TX
Why would anyone write it down, it is plain as day on the schematic I posted, in fact they will be pretty much the same numbers on your M151, wire numbers are mostly standard throughout.
We are here to help but not to do all the work for you.
We are here to help but not to do all the work for you.
- 6,883
- 9,531
- 113
- Location
- Papalote, TX
Actually someone did write in down but this is ONLY a guide, you still need to confirm on the applicable schematic.
- 34
- 5
- 8
- Location
- Atkins AR.
THANKS FOR YOUR TIME
- 6,883
- 9,531
- 113
- Location
- Papalote, TX
No problem, will not happen again!
papakb
Well-known member
- 2,285
- 1,185
- 113
- Location
- San Jose, Ca
All of this is located in the back of the TM 9 2320 280-20-3 manual. If you haven't already downloaded them you should!
Now the REAL QUESTION here is why is the +24V power to the voltmater labeled 567A when it's simply another lead coming off of the 27 line?
Now the REAL QUESTION here is why is the +24V power to the voltmater labeled 567A when it's simply another lead coming off of the 27 line?
Last edited:
- 6,883
- 9,531
- 113
- Location
- Papalote, TX
That is exactly what was in the attachment I posted for him!
- 4,390
- 4,171
- 113
- Location
- Brentwood, Calif
is the ranger tab for show? Or did you earn it?
If you were a Ranger, or even in the military, you know what a TM and an FM is and how to use them.
BLK HMMWV
Well-known member
- 1,574
- 491
- 83
- Location
- Pasadena California
Horse ---------- Water-------------- Drink
You don't honestly expect him to try and help himself do you.
Ok I'm going to go crawl back under my bridge now.
I think I need to change my title to curmudgeon.
You don't honestly expect him to try and help himself do you.
Ok I'm going to go crawl back under my bridge now.
I think I need to change my title to curmudgeon.
- 16,668
- 23,813
- 113
- Location
- Burgkunstadt, Germany
Ok, ok, ok. Lets go to page two. Point gotten across. Lets not kill the horse. Everyone has to start someplace, and we have all been there, at one time.
- 585
- 585
- 93
- Location
- Evansville, IN
Because 27x27=729-27-27-27-27-27-27=567...DUH !!!