- 1,010
- 1,465
- 113
- Location
- Wilson County, Texas
Everyone,
I normally keep my troubleshooting issues on one thread for one machine, but I searched a bunch, tried a bunch on my own, and have hit a dead end.
https://www.steelsoldiers.com/threads/mep-802a-fix-up-thread-3-0.212213/
The search function doesn't work well, so forgive me if it is on here somewhere, but I didn't find it.
But if it's not, I figured a specific thread for this may be a good one to have on it's own in case others have the same problem.
I have a unit where the M8 Percent Load gauge reads, but exactly half what it should. It is making me this it's just not picking up a leg like its supposed too.
So far here is what I have done;
-Replaced M8 with a known good.
-Traced wires for anything broken/loose. All seem okay.
-Check S6 to be sure there was a connection between 26 & 28 as there should be when in 240v single phase mode. There is.
-Rotated S6 until my hand was tired and sprayed it with contact cleaner.
Hoping that someone has a quick "You forgot to check this" or something that I have glazed over!
Thanks
I normally keep my troubleshooting issues on one thread for one machine, but I searched a bunch, tried a bunch on my own, and have hit a dead end.
https://www.steelsoldiers.com/threads/mep-802a-fix-up-thread-3-0.212213/
The search function doesn't work well, so forgive me if it is on here somewhere, but I didn't find it.
But if it's not, I figured a specific thread for this may be a good one to have on it's own in case others have the same problem.
I have a unit where the M8 Percent Load gauge reads, but exactly half what it should. It is making me this it's just not picking up a leg like its supposed too.
So far here is what I have done;
-Replaced M8 with a known good.
-Traced wires for anything broken/loose. All seem okay.
-Check S6 to be sure there was a connection between 26 & 28 as there should be when in 240v single phase mode. There is.
-Rotated S6 until my hand was tired and sprayed it with contact cleaner.
Hoping that someone has a quick "You forgot to check this" or something that I have glazed over!
Thanks