• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LMTV Air Conditioner

GeneralDisorder

Well-known member
Steel Soldiers Supporter
2,078
5,310
113
Location
Portland, OR
Yeah that's essentially exactly what I posted above. You still need the transducer and charge sensor - whatever those are - and neither lists specifications so you still need to contact Red Dot.
 

jpelc

Member
30
25
8
Location
Madison, Wisconsin
Yeah that's essentially exactly what I posted above. You still need the transducer and charge sensor - whatever those are - and neither lists specifications so you still need to contact Red Dot.
The RD part numbers are included on both schematic and harness details.
Charge sensor is just a low pressure sensor PN: RD-5-9165-0. Its a two contact on/off low pressure typical AC switch.
High Pressure switch is more specific as it is 3 wire sensor with reference 5V, ground and signal: PN RD-5-9254-0.

As suspected, the Protecht Module will not power on the compressor until the conditions are right. Must have all the the sensor working.
 

Another Ahab

Well-known member
18,007
4,579
113
Location
Alexandria, VA
Update!
Attempted to connect with RedDot with no success. Turned to MME, where I bought the newer GEN II unit and pleaded with them to request the diagrams from RD.... success! Got the wiring and harness diagrams. Christal Clear! I see the light.
I am including it here so to help all.
It's Christmas! It came early!!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks