Search results

cucvrus that means I should check if the solenoid is working properly. I can hear the mechanical noise and it can be also measured. I can still remove the cylinder head if it indicates a defective gasket the next time I start it. 1998 - 2005 I only renewed the glow plugs once. I don't know how...

I don't find any incorrectly wiring after take much time in control that by all the TMs here. Did you have any Note for me?

Nothing can be pulled out of the hole because the glow plug is stuck as a whole. It is - we call it mushroomed. In order not to cause more damage, the cylinder head comes down again. It then allows us to take another look at the cylinder surfaces to see if there has been any damage. All together...

We have original setup for glowplugs. we did not measure the new glow plugs before built in... so it could be that one was defective and so did the others too ... We last fixed a bug in generator 2, which was bought completely new and installed with a new regulator. In the end it turned out...

there is now another problem After the engine started getting worse and worse, we checked the new glow plugs. Despite the intact pre-glow module and the correct glow plugs, all plugs are defective. Two are stuck and we have to take the cylinder head down to remove them. I have no explanation for...

all lines already exchanged and important to know it was not 100% Biodiesel. It was the ususl diesel which had 7% biodiesel include.

I thought something like that. Stored for 15 years and with biodiesel in the system ... 15 years ago I did not empty and clean the system - a mistake that is now taking revenge. Thank you for the clear explanation of how the injector pump works and the error explanation I'll try to clean the...

Fuellines are all new, there are no visible damage on it. I will take your advice when replacing the Injectorpump

Thanks - i know of this diesel cleaner, never used some before on a dieselengine. I will try it. I have already checked the options for an exchange or a repair. It is expensive but also a necessary part for the operation ... This investment is necessary so that the truck becomes an operational...

The injector pump is not new, not rebuilt or anything replaced. It was just removed and built in on the marks like before. The injector pump is the only thing which is not replaced on the fuelsystem.... and the truck was stored for 15 years.

Now there is another disappointing update After 15 km we were stranded on the roadside to be towed away again. Until we had this failure, never come over this distance. The engine stopped just without anything else, no noise, just shut down - very popular at the intersection ..... You can...

Never to late for an advice or comment! The installation is correct with the timing mark. After we had solved all problems around the glow plug controller and electrical system is the problem - It have in cold engine temperature a very loud "combustion noise" in germany we call this typical...

I am agree with you Did have offer from car-painters about 3000-5000 Euro for complete new paint... so before investing so much money it will be complete disassemble, cleaned and grounded by color ground and rustprotection. Some people around us advice us to us car wraping - i dont know if i use...

A better perspective picture it need to remove the fender for welding - will be done just before painting This area is covered with the "air intake grille?" Difficult work but i am able to do this It would be nice to have a repair-shield for it but usually is that not an area where you can...

i know about the work of own in this lines (as i am metalworker and machinist) but i have no tools for it. We doesn`t had a great various on after market parts here in germany. I prefer to buy in germany as it is for privat people much easier and at least faster if the parts are on stock. I put...

Want to give you all an update: I couldn't done a lot last weeks after I had broken my right hand - so I need much more time as I want to come up with work. Lastly some of the electrical wiring was defect during the generator circle. I take new connections and now i should work right - but at...

this clock comes from my first car a Ford Capri II in the early 80. Thought 1997 after this clock went through some cars that it fit perfect in the M1008.

So after testing we must say the voltmeter is dead. So the clock become a famely member beside => VDO Voltmeter :D (y)

Couldn't have a look on the truck these days. We had yesterday a storm with much rain and friends of us need our help. Thanks cucrus for your helpful info, vdo is easy to got in germany and it is good to know that it is changeable.