Search results

Im not sure how to answer this question, but let me try and understand this….so only a hmmwv with a Hydraulic fan clutch can ford water crossings? any other tactical vehicle just waits for the engineers to show up and build a bridge? All tactical vehicles are left on the Landing craft except for...

I will try this…I just donated probably 10 or more AGM Hawkers. The interstate dealer requires a one for one core swap, if you don’t have a like for like, its 2 standard lead acid car batteries per one 6TL. Ive recovered Hawkers in the past, unfortunately they won’t hold a load, i used an older...

You need a 6.5 oil pan…

So I guess the new Geared Fan drive trucks can no longer go in the water? I mean….they use a viscous fan clutch Now on all new Hmmwv’s.

The plug with 3 wires off the engine harness is the throttle position sensor…transmission won’t be shifting or not correctly

My company and Mike’s company both produce the kit…the one form Canada is a bit lacking, such as providing the modified pump pulley, the conversion is useless unless you have the ability to find a shop that can perform the work…we provide the pulley and well as some other critical additions that...

Like I said….A2 and above….you have an ECV, that’s “above” the A2.

all A2 and above trucks have CTIS capability in the hubs

Absolutely any motor that will fit into a hmmwv will not create a difference other than more HP and torque…

a new truck from GP arrives everyday, there isnt enough bandwidth to document what I find.

Best trail trucks are 3spd M998’s IMO…

Cars get into accidents with the number of trucks sold now from GP….not surprised.

So you don’t have any idea what you purchased? The rear diff says ECV…standard spindle nut washers

You determine what you have by the serial number of the truck, they made ECV and REV’s in A1’s….anything above 300k is a REV.

LEAD is Letterkenny Army Depot and yes, thats a reset date…AFAIC, I’ve never cared what my DOD was or is, as long as the truck is good in all Aspects of mechanics and overall condition. Also…any 3 speed truck is a 94 and below for the most part.

Is the center link oriented correctly?

you can bypass that thermostat for testing, plug the male and female packard plugs into each other,the compressor should run in the AC position. if it still trips? The thermostat is not the issue.

they aren’t aftermarket, not sure why people think so just because it’s sold from another country, milsurp is all over the place. I just bought an S3 box from Kuwait…OEM and arrived in 3 days.

It’s clear in the pic that the AC and IGN wires have been spliced…I would verify the connections are intact. if you have an over running pulley, make sure it’s also operating correctly