Search results

Is there a source for seals?, this winch has a rebuild tag of 9/67 at TEAD Utah. . . it's gonna need to be torn down and reuilt I suspect, as it won't hold oil.

I have truck with a Tulsa Winch, it looks alot like a Garwood, which made me wonder if the parts interchange? Thanks, Ed

Is there an O-ring in there somewhere to seal the plunger? Number 4? Nevermind, they are brass. TM 9-2520-246-34-1 has another view with names of the parts.

Is there anything that can be added to Gillespie (383 carc substitute) enamel paint to dull it further than it already is when dry? I'm looking for something to mix with the paint before spraying if thats even possible. Thanks, Ed

Whatever. . . Air pushes a plunger attached to a fork to engage the gear. . . spring pushes back when air is not present.

An air actuated solenoid on the front of the transfercase that engages the front axle.

Most likely, yes. When you accuate the transfer case switch and then turn it off can you hear it purge air?

If he's able to hold 90-120, he does not have a large air leak.

As requested. . .

Anyone have any popcorn? :razz:

Buy a manual from Autozone etc. . . for the turn signal switch problem, not really that hard to fix, but pulling the steering column apart without the right tools can be a pita. Your probably going to need a new turn signal switch. . . As for the Gen light issue, could be alot of things, try a...

Part of the Dually conversion was installing a D-70 in the rear.

2200.00ish each, same bidder got both of them.

Look underneath the truck for 2 airpacks, one on the drivers side, on on the passenger side.

Well, I'm curious to know if either of them run, and put out power, let me know. ;-)

Only because my better judgement kicked in. . . :twisted:

Skids are tappered from the bottom (wide) to the top (narrow) at the top 24" between "ish" width between skids outside edges 45" ish Overall length of skids, 61.5" ish skids approx 7" ish tall tank overall height, 57" ish

I've got some I can measure when I get home today. Also, a while back I submitted the TM for tank and pump unit, not sure if the dimensions for the tank are in it though.

It never had CARC on it near as I can tell, when I got it it had a really faded 4 color pattern on it. http://www.steelsoldiers.com/deuce/29844-newest-refurb.html

I decided to go with these flag wavers instead! :grin: