• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. ida34

    Water base CARC

    This finally dawned on me. Carc should be sprayed with a larger tip like a 1.8mm or a primer tip. Did you have a 1.4mm or 1.5mm tip? This is normally a regular top coat tip. The extra solids in the carc clog up the smaller tips. It this was not the problem then there was a problem with the paint...
  2. ida34

    Wiper Modification

    The motors, windshields, and wipers are all the same as the deuce. It should not be a problem. If yours have a screw then someone messed with it. Someone may have already "upgraded" At any rate, the modification involves putting a knurled knob on the end of the wiper motor shaft. It should not...
  3. ida34

    Water base CARC

    The literature I have specifies a squirrel cage mixer not a shaker. Either you paint was bad, not mixed properly, or you gun set up was wrong. Did you adjust the pressure on the gun or into the gun? There is an adjustment on the gun and it makes a big difference in the spray.
  4. ida34

    another MV threatened by code enforcement

    I am not trying to take up for the HOAs but your grandmother signed on to this one when she bought a place within a HOA. We don't need legislation. We need people to stop buying houses that are in a HOA. Some people like living with their neighbors having restrictions. I don't. I never bought a...
  5. ida34

    M151 Rust-free, NEVER CUT questions...

    Get under it. Good rewelds can't be be seen from the top. The welds are ground down to the point of being invisible under the paint. Most people do not grind down the welds on the underside and the weld line is visible. This is if they did a good job. The hack jobs usually have extra metal on...
  6. ida34

    Mid Ohio Military Vehicle Show July 23rd & 24th 2010

    That would be great if it works out. I would appreciate it. Thanks Chuck
  7. ida34

    Mid Ohio Military Vehicle Show July 23rd & 24th 2010

    Is anyone from Michigan or from near Toledo going? I need to get a case of paint a little closer to home. Thanks Chuck
  8. ida34

    So, started the truck and Gen1 light came on...

    If it was not before it is now. Do not disconnect an alternator from a battery while the truck is running. It spikes the alternator and if the spike does not kill it the alternator will sense zero voltage and start putting out high voltage attempting to charge thin air. Gen 1 is on the...
  9. ida34

    Dropside loading warning stencil

    I have never seen the warning before and we had all kinds of dropside five tons and deuces. I saw a newer box truck with a lift on the back. There were no fewer then 10 warning decals on the side. Has anyone ever saw the movie Idiocracy? The premise was an average or slightly dull guy is wakes...
  10. ida34

    Rookie with new m101a1, pintle hook questions and more

    Because it never comes apart. I have to agree with others. Better to bolt it with the correct grade 8 fine thread bolts. The military bolted them on. I would even bet your hitch is bolted on. Does look like overkill to me but I am sure you have plenty of peace of mind knowing it will not break off.
  11. ida34

    CCKW 353 Airtransportable / Airborne

    I guess I was not really done since I went on so much after saying I was done. Now I am really done. :nothingfunny:
  12. ida34

    CCKW 353 Airtransportable / Airborne

    I don't agree and am done with this argument. Why not land and LST in the pacific? Why not drive the truck off the LST at Normandy or the docks when they were captured. Vast road network in europe. Isolated islands in Pacific. The only place they would use the trucks would be somewhere they...
  13. ida34

    Rookie with new m101a1, pintle hook questions and more

    Smack the guy at tractor supply twice. Once for suggesting you cut up the trailer and once for not knowing what his company sells. IDIOT. I went into an auto store in Tennessee about 15 years ago asking for anti-seize lube. I told the guy it was gray and was like paste for putting on bolts...
  14. ida34

    removing radio plug in a 1028

    You might want to look again. I think you are talking about the diagnostic connection for the STE-ICE. Is it the one with several pins and about 2.5 inches round? If it is you can move it but be careful about grounding or shorting the terminals. It connects to several subsystems to provide...
  15. ida34

    MEP018A wiring pics

    As promised. It is the best I could do in a downpour.
  16. ida34

    CCKW 353 Airtransportable / Airborne

    One must also remember, we took Jap airfields also instead of making our own. No problem landing at an already established airfield. My biggest point is it would have been much more useless to have the air transportable truck in the ETO. Can anyone argue a transportable truck being more useful...
  17. ida34

    CCKW 353 Airtransportable / Airborne

    While I might be wrong I do not agree with your reasoning as to why I am wrong. I actually think you make my case. It was much easier to get a truck somewhere in the ETO. 1) Small island needing a truck with a landing strip would not need a whole LST showing up to provide one or a few trucks...
  18. ida34

    MEP018A wiring pics

    Bjorn, Mine are still on the trailer and they are connected to a huge switch box. I can take a pic later and post. Also, you should have a hinged cover there to go over the connections for safety. Looks like yours got torn off.
  19. ida34

    Question about what oil to run in my deuce?

    Oil requirements in the forum tips and tricks section? Are changing oil in the search engine? Just bustin your chops. I know you are new here. Welcome and just make sure you are posting to the right forum so you can be sure to get the answer you need. BTW 15W40 is what the military uses now so...
  20. ida34

    Engine running hot, but heater not working?

    The clutch and fan should freewheel when there is independent airflow to the radiator. At 65 it should be uninterrupted airflow so it really should not be a factor on the freeway. I have heard about a water pump having the impeller come off with no outside indication but then it would overheat...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks