• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. rfischba1

    M1008 Glow plug relay stuck.

    Well the truck started right up , no problems with the relay sticking and the volt meter jumping all over the place, only clicking noice now is the odometer is stuck and clicks as it tries to turn over the miles, but the speedo still works. Thanks guys
  2. rfischba1

    M1008 Glow plug relay stuck.

    I'm going outside right now and give it a try, its about38 degrees outside here in MD. If the lights dim everytime the GP cycles that's a problem right??? I'll report back later.
  3. rfischba1

    Combat Dash Lights

    Can you reach any of the dash bulbs w/o taking the entire dash apart? I would love to be able to replace the turn signal arrow bulbs.
  4. rfischba1

    Front springs worn out?

    Like I said before, added air to the tires, all were low, does not pull during acceleration, but if I hit a bump at about 30 mph, I still get the death wobble. I will have the king pins checked out . Where is the stearing damper located?
  5. rfischba1

    Front springs worn out?

    I aded air to all the tires, all 4 were low, much better ride and does not pull right when I hit the gas.
  6. rfischba1

    M1008 Glow plug relay stuck.

    Temp was about the same out side, 47 degrees rain. I was worred because I've never had the lights dim when the GP's cycled and the volt meter dropped back and forth.
  7. rfischba1

    Front springs worn out?

    I beleive he may be wrong also on this one. I will check the tire pressure, I do beleive they are out of balance. Again the front end shakes like the RF wheel is falling of every now and end. But telling me the front end looks good, no worn out parts , only the springs are shot. Just does not...
  8. rfischba1

    Front springs worn out?

    Anyone have this problem w/ their M1008? Truck wants to pull hard to the right when giving it fuel, also shakes at times. My mechanic asy the front leaf springs are worn out,
  9. rfischba1

    M1008 Glow plug relay stuck.

    I did not ha[[en today when I started the truck, but I need to have it checked out.
  10. rfischba1

    M1008 Glow plug relay stuck.

    I tried to start the PU last night and for the frst time after it started the could hear the clicking sound, the volt meter kept jumping, and the lights dimmed all at the same time. Does this sound like a glow plug relay problem? Will this damage the stsrter, alternators,? I shut the truck off...
  11. rfischba1

    Heater blower motor

    My fan stops running at time and make a squealing sound, is this the fan motor doing bad?
  12. rfischba1

    MUST READ -- Big Changes

    like it a lot, nice od colors
  13. rfischba1

    Diesel additive

    RE: Power Service Additives Anyone used Marel Mystery Oli in their diesel fuel, does it help?
  14. rfischba1

    Cant feel 3rd gear shift

    Will do, Thanks
  15. rfischba1

    Cant feel 3rd gear shift

    My M1008 starts and runs great execpt it feels like it never shifts into 3rd gear. speedo broken so I do not know my MPH, but the transmission feels like it stuck in second. I have not changed the transmission filter and fluid yet. What should I be checking, vacum hoses??
  16. rfischba1

    Hard to start

    When I try to start the m1008 for the first time it first starts and shouts down after 10 seconds. I have to pump the fuel, and crank the motor several times until it starts. Ones its be run , starts every time, only when it has sat over night. We replaced the fuel filter, air filter, and glow...
  17. rfischba1

    wipers not working on low

    Mine also do not return to the down postion when turned off, looks like they indtalled a new wiper motor recently, even the hoses look new, I'll try the conections like you suggested.
  18. rfischba1

    wipers not working on low

    Tried my wipers today worked a while, now only the high speed selection works, and washer does not come on. Is teh motpr shot, or could the selector switch arm on the left of the steering wheel bad?
  19. rfischba1

    vibration at 55mph in m1008

    Drive shaft may be a issue , never thought of that one.
  20. rfischba1

    vibration at 55mph in m1008

    Have not tried to push it past 55 once the noise starte, I did have one hub locked in, set it to free, still has noise and some vibration, could be old tires even though they have excellent tread. Mow about a wheel out of balance? Next stop will be a tire shop just to make sure they are not...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks