Search results

👍🏼👍🏼

Also, if I feel the Zero might be touching something or bottomed out , I will put a small washer or two under it to give it a little space inside 👍🏼👍🏼👍🏼

pull it, rebuild it, and install threaded inserts so you can remove it from the top with 1 person !!! 👍👍👍

Ive seen this scenario many a time... The tolerances are so tight that the zerk bottoms out.. Might back it out a turn or so, and see if it will take grease.. Worked for me a few times.. Inferior assembly

following JK

Chicken... engine hoist worked fine..

I need that Jack !!!!!

where do you sit 😂

BLueOx...... Love mine... I went with a waterporrof material but he also make breathable tops.. I wanted something i could put on and take off easy in 5 mins.. Stores in a bag in thye back, pop it out if looks like rain,, I dont mind running no doors in rain, but love the quick top to keep...

Pinion gear in my book !!!

Bearing inside diff.. Output flange bearing.. My guess

You can just knock off the ABS gear ring BTW... Tap Tap Tap (y) As as I know any early model H1 halfshaft will fit HMMWV.. They will be 10k axles.. Upgrade Yeah !! I switch em as they fail.. Rebuilding 7k shafts arent worth it, nor very feasable with the pressed end.. Rockauto, Autozone...

Wheel alighnment can be foumd im Tms. Instead of string I used a laser line and tape measure. Alighn laser line with frame and do measurenments from there ... Not sure what this has to do with TailGate logo but......... I digress !!!

Crickets !!!!

Tobash !! 2 decks of cheap cards woulda done that deal easy peasy....

I dont think a small nick is gonna hurt the structural integrity... but you do you 👍

Update ???

I just carefully dremmeled a slot in that inner casing.. doesn’t have to be perfect or all the way through.. I had to go at an angle to get most of it… then a chisel in the crack, should open up and slide off 👍🏼

Cut the cage off with dremel and then use a bearing cutter on inside body of bearing.. Then the fun part, stick the spindle in freezer to shrink it, and boil the bearing in a baggie to expand it.. Then quickly assemble and pray.. Shop press helps also.. Id take it to a machine shop..

Bingo !!!