Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
With that being said. I will try to explain what happened through text rather then with a video. I replaced the fusible link going from the red white strip wire to the diamond bus bar with an inline fuse for now. I figured it was fired for a reason and it is easier to replace fuses rather than...
more pics and more to come
Well I passed on the suburban, with a m1009 project, m35a2 project and a newborn it was a wise decision on my part. My best friend ended up buying it. he also has a 09 project under works. Here is a pic of the door tag, he said the vins match. I will try to shoot a...
i replaced the links and started her up. the back battery is still not charging but the alt is putting out 14.xx volts checking the back studs with a meter. gen 2 light isn't working, but it bad be due to a old instrument panel. Also, in the exciter wire i am not getting 12 volt on the ign...
quick question on Pass side alternator wiring VIDEO (FIXED)
just a quick ? about where two wires go, video below. The wire coming form the bat. side of the alternator and the 12v hot wire coming from the plug, they will run to the pos. side of the bus bar correct? when i bought this vehicle...
He said the engine was original and was turbo charged until the turbo went out. and that the rear end has been changed to a 1 ton. A buddy of mine is going to go look at it this weekend and may buy it. I am going to get him to send me the VIN
I ran across this for sale today, the guy said its an old Air Force suburban used to haul equipment. The inside looked just like the m1009, bare bones blackout lights etc... I have always heard there were no suburbans in the cucv program. Just wanted to get some input. I may call and get the...
Thank for the reply antenaclimber. I have solved the glow plug problem. i buddy of mine came in today with his m1009 i changed my card out with his and my relay works fine now, cycles as it should and everything. Also, we put my card in his and had the same problem,. relay would not click off...
Thank for the reply antenaclimber. I have solved the glow plug problem. i buddy of mine came in today with his m1009 i changed my card out with his and my relay works fine now, cycles as it should and everything. Also, we put my card in his and had the same problem,. relay would not click off...
I read the section before posting and all i got was "Glow plugs will cycle to 0 volts in approximately 20 seconds after firstoperation. Time will shorten as glow plugs become hotter." my glow plugs stayed were still on when i shut the vehicle down, over 60 seconds later. I searched the SS and...
I am going to give that a try tomorrow.... I need to first test the relay completely and make sure it is working fully. Then make sure i am getting power on the pink wire.
I am pretty sure you are correct. I am going to read the TM again tonight and check everything again in the morning.... When i was getting power to the relay i wonder why it was not engaging it?
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!