Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
We're keeping our fingers crossed that we may have located the problem which we think is in the voltage regulator that sits on top of the big Alternator which is Niehoff 28V/260 A + 14V 140A. (Product Code for the alternator should be Niehoff’s N1224-1, NSN 2920015592715 Part number...
Interesting thought. Every vehicle I've ever owned that was more simple in design was a lot easier to diagnose and maintain. The more sophisticated the electronic systems the more susceptible they are to error. We will check out your suggestions...
Thanks for the quick response. We will check out some of what you mentioned and report back. I too think that there is something amiss with the wiring or...It's hard for me to believe that we have two bad load controllers.
A close friends Battery Load Controller went out on his 2008 1078A1 and it was replaced. At the time that it was acting up there was an intermittent "no charge" light going on and off. I think its purpose is to protect the batteries from over and under voltage.
It is my understanding that...
Keith, I would be interested in the data from this experiment. If you compare the temps coming out of the vents from the two vehicles without the A/C on what do you get as a reading. Here's why I ask. If I turn on just the fan in my truck whether or not I have it set on recirculate or fresh air...
Oh that hurts because I know you would come to my aid. Truck not here, but I will crawl under it over the weekend and see if there is anything worth photographing without some surgery.
There is actually another bracket on the end of the frame rails. It is difficult if not impossible to photograph this without pulling off the big front plate. So those small "L" brackets actually attach to a much larger bracket that in turn attaches to the frame rails. Regardless, it would not...
I just purchased the repair parts for the pump yesterday from E&R Industrial Sales in Indianapolis. 317.228.0106. All I had to do was give them the part numbers posted above and they are being drop shipped from SPX.
As background, I called SPX about a month ago asking about the parts. They...
I haven't done it from scratch, however I don't think it would be too difficult to fabricate some brackets to hold it in that spot if that is your intention. I compared the size of my condenser's width to one that is being sold on eBay and the latter is only about 3/4" narrower. Being smaller...
You can see from this image what I am referring to if you compare it to the posted image on the thread. The brackets are different. This is my new fan unit and nice clean condenser.
There are really 2 "brackets", or more properly stated sets of brackets. There are 2 large brackets that attach to what I will simply call the front frame rails. These are heavy metal brackets. In addition, there are 4 separate "L" shaped brackets that attach to the front of the condenser's fan...
I think Keith's idea of mounting the condenser up high and out of the way is very interesting and will certainly solve the problem of having it up front like the factory install. Attached are three images of how I found the condenser in my truck and the front of the radiator. The fan unit and...
Thanks everyone for your "thanks" regarding the tip for positioning the tire with the pipes. It actually works quite well and you can do it by yourself. Stick the pipes through the wheel holes and up and over the lug nuts and raise it up. What also works is a shovel, actually two work best...
Here's a neat trick that was sent to me by an active member on this site (used with his permission). If you need to remove and install those big heavy wheels you can easily do this by yourself with a couple of pipes that fit over the lug bolts. A picture is worth a thousand words here. Just...
Thanks so much for this information...! I had seen a number of references to pulling the axle shafts but never sorted out how to do it. Much appreciated...!
Great job! What did you do to prep the towed vehicle for the ride? It probably goes without saying due to your experience but I have to ask for the learning involved, so here goes...did you drop both drive shafts and what if any special tools did you use to do it? Thanks
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!