Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Wipers do not work.
I have not serviced air dryer as I'm still in troubleshooting phase.
I have not searched PPV as I'm 25 miles away from a computer and I'm borrowing a phone to answer responses. I post here to get quick help as I'm sorta in a bind being here away from home with the luxury of...
So this morning I go outside and of course I'm having the same problem :( Is the PPV valve on the passenger side just before one of the air tanks? It's like a taller cylinder piece?
I replaced the governor and all is working again! Now, it did warm up a lot since this morning, so tomorrow morning I will have to see. But for now, everything works as it should!
Thank you guys for you quick responses and helping me get the truck up and running again!
Andrew
Tanks were drained last time I drove it. It was colder the other day when I drove it. I think it was upper 20's. I just purchased another governor. Will be installing it in the next few minutes.
Hello All!
I drove the truck on Christmas Day with no problems, everything ran just fine. Today I went to go excerise her again and I noticed that the primary and secondary tanks were both reading 150+. I never even got a chance to leave :(
I'm wondering if you guys think the culprit is the...
So I've noticed recently that when the parking brake is released (the handle all the way down). I can still hear the high pitched tone of low air buzzer/parking brake is still on. The light on the dash is not flashing or steady on and the brake is off.
I have traced the wires and I don't see...
Yes Sir, the bulbs look fine. It just stared acting this way. When I move the turn signal to a position the light stays solid green. I'm thinking the the switch that controls all the lights.
I have been driving around and haven't had any issues. Until the other day, when you put the switch in the brake light mode (one turn to the right) the turn signals do not work. The light comes on at the indicator when u pull or push for the signal but nothing happens. Also the brake lights...
On mine I have not seen it move. It moves very freely when you move it by hand. As in you can rotate it and it will keep spinning, its like it has no resistance. I'm going to try the 1500RPM thing later today and will let you know what I find. I drove it for 80 miles and the temps were around...
I'm not seeing my fan turn on at all? I have a M923A2 and I can't seem to find any info on it. I see a lot of topics about the A1 and checking air lines etc. but I don't see any of that? My temp gauge shows about 180-190 while driving. I don't hear the fan come on and everytime I look at it...
CTIS comes on and highway setting flashes. I'm pretty sure the CTIS is working. The valves on the ctis look just like normal tire valves. I'm able to check and add air to my A3 with no issues. That's why I'm scratching my head.
Hey guys!
I know this is going to said way left field but here goes... I just recently bought a m923a2. This morning when Im looking it over I wanted to check all the air in the tires and bring to to the same pressure. When I went to check them I don't any reading. I also pushed the shredder...
I found a thread located here on where to add Marvel Mystery Oil http://www.steelsoldiers.com/showthread.php?34591-M35A3-Owners-unite/page47 Do I need to disconnect any air lines or close any valves? Do I add the oil then reconnect the lines and steer back and forth? Or do I leave the lines...
I find all info helpful and hopefully it can help other later. I have not time to troubleshoot my truck. But when I do, Im gonna replace that air valve that was mentioned on this thread and also add mystery oil to the air assist cylinder.
Also thanks a lot Glcaines!! I'm gonna order that part listed above, and beat the crap out of the one currently on the truck. I'll also do the MM oil and let you all know how it goes. Thanks a bunch for all you guys input!!!!
So the link that gimp posted is to the valve that is next to the air tank under the truck correct? If so, I'm gonna order one. I will have to post a picture of the one on my truck. This looks different? Maybe it's just me
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!