Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
With the LDS and 11.00R20, my Deuce has no fear of hills. The rolling hills in my area can all be done in (OD) 5th high, watching the EGT. Loaded with sand bags, she was noticeably more sluggish, but going was not an issue....stopping quickly, however, was! On one trip, the well meaning loader...
As for the brakes, if you intend to drive the truck at all, these do need careful attention. Single circuit hydraulic brakes, no redundancy. Brake fluid level, bleeding air pack, then bleeding all wheel brake cylinders, adjusting all brake shoes are the minimum to do, even before intensive...
Interesting! I can't say I knew of them before. Thanks for helping me learn new things!
Here is info I located on the GMC Toro-Flow: http://6066gmcguy.com/toroflow.html
Based on the pics, I think we have a winner!
The YouTube has a video of one starting and idling:
Now...which toro flow is...
It would be helpful if you could peek around the engine for any manufacturer plates etc.
6 cylinder four stroke V layout diesels were not very common back in the day. As a repower, I would assume the engine dates to the 1970' or 1980'. International/IH made inline sixes and V8s, it certainly...
Have you checked the frame rails? It may have been relocated there to avoid exhaust heat.
Unless you toss the starter and go with a modern gear reduction starter you do need that external relay.
Where in upstate NY are you? I'm just an hour North of the border.
Sent from my SM-G950W using...
The #7 wrecker set is rated for 3000 lbs. The rail is lower and shorter than on the "bomb hoists" (and these are rated for 1000 lbs).
I guess you can use it to pull engines and transmissions. I could see it lifting something long if it can brace the load against the truck, maybe a long log or...
Here is an upgrade project for your springer seat to air ride: https://www.steelsoldiers.com/threads/reworking-deuce-spring-seat-into-an-air-ride-seat.106124/
:)
You seem to have a good step-by-step mindset already.
You can put a pressure gauge into the plugged port where the fuel lines comes up on top of the tank. With the in-tank pump running, you should see 5-7 psi there.
Loosening the fitting and removing the fuel line on top of the tank, removing...
Just a tip on leaks involving plastic lines - whoever wrenched on the truck may or may not have put the "trumpet" looking brass inserts into the ends of the plastic lines where they go into the compression fittings. If you spot a leak, for example on a fuel supply or return line, be careful just...
First thing that comes to mind is the hydraulic head having difficulty reaching injector opening pressure when hot.
Methinks it could be a wear consequence of running waste oil.
Others will chime in.
Sent from my SM-G950W using Tapatalk
Ran her without a roof and the windshield down for the first time in ten years. I had almost forgotten how much fun it is to ride that way (with goggles; don't need a hornet embedded in my cornea!).
tobyS is right, the original M35 steering wheel size was 20 in. The A3, with power steering, received a slightly smaller steering wheel with 18 in diameter. I changed my wheel for an A3 wheel before I fitted power steering, so I can confidently say that the smaller wheel gives you a bit more...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!