Search results

Does your horn work? If not, then attention needs to be paid to the black out light switches. If your horn works, then. The gauge cluster is basically a normal Chevy part. That means the silly flexible printed circuit stuff could be messed up or broken. I would recommend you pull the gauge...

Small kids on tires work good too.

Most threads about CUCV tires end up talking about speedometer calibration and what gears to change out. Most of us don't have a friendly Chevy parts guy anymore since they all closed down. I found this site which list all the gears available, the color so you don't have to count your teeth...

I have read several post in the past about those stupid plasic "nuts" the headlight aiming bolts screw into. The plastic threads strip if you look at them wrong and replacements from the "help" section of your local parts store are even worse. My drivers side up/down screw "nut" stripped out a...

My assistant principal was one of the drivers of some car in that race. I will have to ask him if he had the pink #6 and then make fun of him about it. Glad you got the right tools to have at it.

You are correct and I am wrong. I changed the original post. Thanks.

You wanting tough trails or just a nice drive through the country? Land Between The Lakes is just a few hours from you over in KY. Lots of trails a M35 will fit on, 5 or 6 different camp grounds, a drive through buffalo range where you can probably scare all the animals and basically miles and...

1-1/2" BUDD socket. The socket you need is for semi trucks. It will have the 1-1/2" for the outter rear and front lugs. Then inside, it has the 13/16 square drive needed to pull the rear inner lugs. Most NAPA stores have them, as well as truck stops and just about anyplace that deals with heavy...

Mckoen, Pawnshop, 813Rc and myself continued this discussion at our local LSMVPA meeting last night. We have all pulled M101 trailers with our M1009's. The book might not say you are supposed to do it, but they go together like they were made for each other. One reason that has been pointed...

I see how it goes. I make fun of your M37 body and you start pointing out things about me. Thanks alot Joe. Now I have to pick back. Page 2-57, paragraph 2-14, sub section a (1) of the 9-2320-289-10 clearly states that the M1009 is only supposed to pull trailers from the M416 1/4 ton...

The manuals for all the vehicles pretty much cover the items in use at the time of publication and go back to at least one previous version if there was such a thing. With the trailers, if you have one that covers the brakes in either an A2 or A3, you pretty much have everything you need to...

Hmm, can't add a picture with the edit button. Here it is.

Which trailer, a M101 or M105? Forget the M105. Don't even hook it up. The M101 kind of depends on what you are doing. A few hundred pounds in a M101A2 with the surge brakes that work is no problem. Hauling a ton or so of gravel is not a good idea. The stock pintle would probably hold, but the...

I have to jump in again. The air compressor on the engine puts air in the air tanks. The air in the tanks is then used for the air pack with the brakes, air horn if the truck has one, air wipers and constant air for the emergency break away safety brakes of a M105A3 trailer. The air pack...

I was wrong. I got home and tried it 3 times. Power on, buzzer blaring the needle is right on the line between yellow and green. I hit the button and it drops below the red, then bounces back up while the engine is cranking to the line between red and yellow. As soon as it starts, the gauge...

What does the volt meter do when you hit the start button? If it is dropping down to zero, then batteries or a loose connection are your problem. I will try to look at my volt meter while I start mine tonight. I am pretty sure it doesn't even come close to dropping out of the yellow when...

Start by cleaning all the leads for all the wires involved with the starter. Then, follow the troubleshooting guide in the -20 manual. It will tell you exactly what you should have where and what to do about it.

Change your fuel filters. All 3 of them. Return fuel flow just means not all that is being sent to the IP is being used at idle. It doesn't mean the IP is getting enough for full throttle. By the way, full throttle should give you a governor stopped top rpm of 2830. There is a great manual...

The place had dogs on it when we got there in March. As long as your dog doesn't lift his leg on me or any of my stuff, I don't mind them. Of course, with kids running around a dog might not be the best thing to have.

Ok, you push the pedal, a piston in the master cylinder pushes fluid through the lines toward the wheel cylinders. If your shoes at all 6 corners are far away from the drum, a lot of fluid is needed to push them up next to the drum. That takes the entire master cylinder stroke length. You...