• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Atchuuu

    Battery charging question

    How does the charger only charge the single 12v battery and not cross feed the second battery via the serial cable? I believe it works as you have stated, just curious about how.
  2. Atchuuu

    Battery charging question

    Perfect. That’s exactly the information I was looking for. Thank you
  3. Atchuuu

    Battery charging question

    Do you charge with the seat in place or remove it for ventilation?
  4. Atchuuu

    Battery charging question

    Do you have to remove the serial battery cable? I’m thinking you would have to do that to isolate both batteries.
  5. Atchuuu

    Battery charging question

    Yes, I have read through past threads regarding charging options- Need to keep my 24v system charged as ever o e does but need some help. 1. prefer not to use a 24 V charger as I’m reading it may not balance the batteries correctly. Is this a valid concern? 2. I don’t want to have to...
  6. Atchuuu

    HMMWV M1097R1 specific

    I thought I was doing 65 until I installed a GPS unit in mine. My gauge is off by about 7 mph. When I get mine to 60 it’s rough. At 65 it’s scary.
  7. Atchuuu

    Glow plugs work first start only

    Thanks for the link. Looks heavy duty and it’s reasonably priced. Should mine fail I would consider this for sure. I do have dual voltage but am using a 24-12 converter rather than using tap on alternator. thanks for the information
  8. Atchuuu

    Glow plugs work first start only

    I discovered that the wait light was functioning just fine on the first start only. In other words, after it started once, the wait light did not flash, even if engine cooled down or sat fora couple days. with the kill switch, I turn it to on to start the truck. TSU works fine. When I get to...
  9. Atchuuu

    Glow plugs work first start only

    This one
  10. Atchuuu

    Glow plugs work first start only

    I’m using a boat type switch with red, removable, handle. It wired to the negative side. It has worked perfectly and the wait light does too if I use the kill switch in between starts. If not, the box doesn’t heat up the plugs as shown by the volt gauge. something similar to photo shown. I...
  11. Atchuuu

    HMMWV M1097R1 specific

    Nice job! Congratulations
  12. Atchuuu

    What have you done to your HMMWV today/lately

    Trailer too?
  13. Atchuuu

    What have you done to your HMMWV today/lately

    Tinted the windows and added the MadDog Customs rear light and gear shift harness. Only thing left to do is the back-up camera and I can call it done!
  14. Atchuuu

    What have you done to your HMMWV today/lately

    Mine are DOT stamped
  15. Atchuuu

    What have you done to your HMMWV today/lately

    Almost caught me. If only I had the 4 speed
  16. Atchuuu

    LED blinker module suggestions

    just out of curiosity, have you ever seen the turn indicator on the light work? I know you have had numerous issues getting the signal to work but do you think it is the light itself that doesn’t flash?
  17. Atchuuu

    HMMWV Side Marker Blinker System!

    Great product and excellent service. Installed mine today in just a few minutes (all my wires were clearly marked from recent LED install). The dialectic grease was a nice touch. Don’t expect that to come with the kit. IMO- all side markers should blink so the car next to you, but in front of...
  18. Atchuuu

    24-12v converter. Am I going about this right?

    I did get a blue sea with ground. Everything works great. Was in a hurry so will use the 24-12 now and maybe switch to the 12v side of alternator later. Thank you all!👍
  19. Atchuuu

    Wiper arm options?

    Stupid question! Tired from getting HMMWV ready for cruising the coast. how do you install the wiper arms. It doesn’t appear that the motor returns to a set position. I know how to attach them just don’t know if the wiper bolt is keyed to a set position. Don’t want them going up the frame of...
  20. Atchuuu

    Need help understanding the HMMWV cooling circuit

    So what was the issue and solution. I read the entire thread and there is no ending?!
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks