Search results

What difference does a keyed switch make?

Installed a 24v converter. Plan to connect to the positive and negative battery terminals to converter then to a blue sea fuse box. The Blue Sea (photo below) does not have a negative connection so I will run the negative to the stud on the engine or can also run to the negative lug in the...

I tested it and doesn’t look like I’m getting any power here. Will double check tomorrow.

Okay! Got the headlights working. Although they have some condensation, they do work. Lesson learned, I watched a couple videos showing the wiring to the headlights, well, it was wrong for my application. So after checking the voltage on the dimmer switch and nearly placing and order for new...

24 volts at 17 and 18 so switch is working. Must be bad high beams. They were the cheap version. Low beam works but they get a lot of condensation and on low they aren’t that bright

I was thinking the original flasher on my truck would have to be replaced or I would have to go aftermarket. However, after connecting everything, I found that the blinkers work just fine with my LED kit. Waiting on a bulb for the indicator light but without a light 💡 n the socket they work...

I’m looking at my dimmer switch and wondering if it is wired correctly. From left I have 16,17 and 18. Looking for wiring diagram now.

Which wire do I ground to when I test dimmer switch? And, thank you! I appreciate the reply and advice. 👍

I installed both headlights again. The low beam was working fine. Pulled one light and tested voltage at #17 which I believe is low. Had 16.27 volts. Put the probe in #18 and got a consistent 24.86. then I hit floor switch to switch to high beams and the meter was all over the place.

I pulled the headlight to check voltage at high and low beam. Not super familiar with a multimeter but have no trouble checking voltage on batteries. I put negative on 91 lead and positive on 17 and I’m getting crazy readings. Switches to 18 and get a low negative reading. Am I going about this...

Thank you. I might have the wrong bulb.

My flashers are working with all LED bulbs but…. 1. my high beams are not working. Checked ground and all the connections. Nothing when I toggle the dimmer switch. 2. flashers work when there is no bulb in the indicator socket or when there is a good led light in there. But the indicator does...

Mogman, what does WFO mean?

Great video. Thank you. Will the original flasher box work with LED lights? From what I have read, even if the box tests good, it may not work for LED. Are you running LED lights?

couldn’t find part number. Here are photos if someone else runs into this.

Did it work? Doesn’t look like that module is the LED version.

I have the same issue. Did you just change the flasher module with the original part number or a LED version?

Just wired up my new. Right out of the box, headlights. They have not been in any water at all. turned on lights and one went cloudy almost immediately. It looks like a small amount of orange liquid inside lens. A Google search of orange liquid and led lights turned up nothing. LED lights...

Congratulations! Send pics when installed

Or that I could find. It looks like it comes together.