• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. hendersond

    My M135 Quad cab

    You really did a nice job. I think they look much better proportionally than the M35 series. They usually end up with big spaces between the doors. Good job on the rear seat.
  2. hendersond

    My M135 Quad cab

    How stable is the center door post without the top? It looks like you filled in the backside? I can't stop looking at it.
  3. hendersond

    My M135 Quad cab

    Awe Man! Who would do something like that! I cannot believe it! What the... It is almost like the cabs were designed to do that. They have all the seams and joints in the right places. The only thing is the 2 support channels under the floor take a small re-work. You, Sir, have done great...
  4. hendersond

    New to the group M-220 CDN

    I would really love to see mor pics of the door and catwalks. Great find. Thank you for the post.
  5. hendersond

    SELLING GMC M220 CDN

    Welcome Dano! You may try clicking on his name and a box will come up. You can then send him a private message. We call it a PM. I think there is a thread started where you can post pictures of you and your trucks in the Early Deuce section. We appreciate seeing more trucks. :)
  6. hendersond

    New M211 Member

    Get a bar on the crankshaft and turn it backwards and then forward. I hope you do not hear a big "thunk". Had a block freeze once and break out a chunk of cylinder. Also had a valve hang open and stop the starter once. Dropped a nut down the intake once... Good luck.
  7. hendersond

    Contemplating a Bobber! To do or not to do that is the question!

    Got any more pics of the disk brake swap? It would be very helpfull...
  8. hendersond

    M211 Holley 885-FFG rebuild help.

    Is it the leather part of the piston that is too tight?
  9. hendersond

    M135 Muffler

    I just ordered a Donaldson M065073 muffler. I'll post pictures when it gets here. It is a 20" long muffler with the outlet and inlet on the same end. I plan to use a couple tight elbows to connect to the factory pipes. Should work easily.
  10. hendersond

    My GMC, a little update

    Could you at least just give us little updates more frequently?
  11. hendersond

    M135 recovery in CA.

    Nice looking m135 disguised as a M211. I always wonder how that happens? Would you post a picture of the rear hub? Does it have a title? Does the number on the dask plate match the number on the frame? (Above the RF tire) keep us posted! :smile:
  12. hendersond

    Hardtops and Heaters

    Sweet rifle holders! I gotta make that! Remington 870 12g and a 7600 30-06 Where a I gonna put the .22.....
  13. hendersond

    Raining m211s trans troubles though... To buy or not to buy, that is the question.

    Well, the bed is worth $500 The truck will bring close to $1000 in scrap. The title and data plate is valuable. Mud boggers and truck pullers pay well for those axles. I could go on, and I have in previous posts, so I won't again. Even at $1200, it is still a money maker. There are many trucks...
  14. hendersond

    Raining m211s trans troubles though... To buy or not to buy, that is the question.

    How reasonable is the price? I usually look at this from 2 angles: Extra parts and time saved. Extra parts -self explanatory. Just think of the cost in mounting 10 tires on rims. all you have to do is bolt on the ones from the other truck. The time savings. I see so many people who go ahead...
  15. hendersond

    Hardtops and Heaters

    Hor about tossing us some pics for our viewing pleasure?
  16. hendersond

    Spare parts every GMC owner should have

    I never considered the transfer case. Have you ever known anyone who had a bad one? I have some big medical cans that are getting packed with parts, other side of trailer will probably store the transmission and front axle, and spring packs. I also have to get 39" of frame rails in there for...
  17. hendersond

    Spare parts every GMC owner should have

    Well, I'm running out of room. The cobbled truck is getting scrapped. I'd find room, but someone cut the frame and welded an extension in it. They also put the wrong rear axle in it. The truck has 2 different gear ratios, so they pulled the front driveshaft. I figured that out when I put the...
  18. hendersond

    My first heavy truck xm215

    Congrats, cannot wait to see the pictures!
  19. hendersond

    XM211 Recovery trip

    Nice! Thanks for the video. Good luck on the trip. How far is is?
  20. hendersond

    302 gmc manifold problem

    How much cash did you have to chuck out for that manifold?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks