• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. MarkM

    Had the Pinzgauer and newly painted M101A2 trailer out today

    Those Swiss trailers are really nice and as I recall the brand is Stuart . You have a nice setup. Below is my setup. Mark
  2. MarkM

    Adding Reverse Lights

    Very bright (1800 lumens each) 10 to 30 volts Mark
  3. MarkM

    Adding Reverse Lights

    I mounted mine on the antenna mounts and run them via a switch. Also have a back up alarm on the circuit. Mark
  4. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    Great info thank you very much. Mark
  5. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    When we installed the new harness it had the new connector for the box. Same issue still there. Thank you for the help all good stuff. The relays under the dash are working Two of them. I will try to clean the contacts for the **** of it but have had two different known good boxes in there...
  6. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    I installed a new glow plug controller that came off the same take out truck so they are a matched set. Original glow plug controller when installed had the same results so everything matches. Mark
  7. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    Yes the batteries were disconnected each time anything was done. The start box was replaced with same model number (used take out) and I had a backup start box that I installed just in case I had a bad one and same issue. Thank you for the help. Mark Below is a pic on the boxes. Top pic is...
  8. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    With the stater wire disconnected and switched moved to start you can hear a solenoid clicking under the dash but thats all. No gauge movement. With the starter wire hooked up and switch moved to run the starter cranks and no movement on gauges and no wait light. When switch movered to start the...
  9. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    I disconnected the wire at the starter and no the gauges do not work on run. No movement at all on the amp meter even when starter was cranking. Mark
  10. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    Thanks for the fast response but I did check that and they are correct. I replace the cheap key switch for the real lever switch hoping that was the problem. Power is being back fed somewhere it shouldn't. I am wondering if I may have a problem up at the alternator as a lot of wires head up to...
  11. MarkM

    1991 M998 starting issues that I just cannot figure out Please help!!!

    The story and sorry for the length. Water got into my control box as the glow would flash now and then driving along and sometime the glow light would be dim while driving. So I pull the control box and open it to find a little water in it. I replaced the control box, Installed new glow plugs...
  12. MarkM

    Parade - pulling float...unplug fan control????

    Not a bad idea. Mark
  13. MarkM

    No start issue; seeking advice

    Thank you Sir, Mark
  14. MarkM

    No start issue; seeking advice

    Looks like the engine harness fired. ****. Found melted wires. In the market for a new engine harness but what is the difference between the 6.2 and the 6.5 as I have. The listings for a harness all list for the 6.2. It is not a turbo. Thanks for the help. Mark
  15. MarkM

    No start issue; seeking advice

    Not getting anything on the glow plug circuit. No light or blinking light on run setting. Just blinks the light while cranking. Have to look at just where the power wire goes when put in run setting before the control box. with all the other things not functioning I suspect a relay somewhere not...
  16. MarkM

    No start issue; seeking advice

    Could use some help. A little water got into the control box and that was that. So long story short. New box, new temp controller for box, New key switch. New lighting multi switch. New overkill grounding cables (6 of them). New glow plugs as all were open. Two circuit breakers behind gauges...
  17. MarkM

    HMMWV electrical problem please help. Headlights out no volt meter and no wait light

    I did disconnect the batteries but found water in the old box so something shorted out. Would a bad temp unit cause these issues? I don't believe so. The boxes had the same model number. I put the dried out control box back in just for testing and it has the same issue. No headlights but does...
  18. MarkM

    HMMWV electrical problem please help. Headlights out no volt meter and no wait light

    My PBC box went out and replaced it with another but no wait light, Headlights, volt meter. Wait light blinks on the crank. Just where are the circuit breakers? I know of the one next to the steering column but that should be self resetting. What an I missing????? Also not getting the "thump"...
  19. MarkM

    What have you done to your HMMWV today/lately

    I also replaced my bulbs with LEDs and have been very happy. These can be had for under three bucks each shipped. Very bright. Mark Model Name: P 21/5W Brand Name: RAISE STAR Item Weight: 10 For Vehicle Brands/Model: Universal Item Type: Brake Lights Voltage: 12V/24V Interface Type: BAY15d...
  20. MarkM

    What have you done to your HMMWV today/lately

    Finally got around to installing my X Doors. Took a lot of prep to make them reasonable for paint but oh so worth it. They also made the cabin a whole lot quieter. Mark
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks